Is therr ANY 4.0L blocks in ANY model Jeep that have the oil filter on the driver side of block? I've got a guy saying he went to buy a 01 Grand Cherokee 4.0 engine and the one the person had for sale had a oil filter on driver side.

He's arguing saying it was indeed a jeep 4.0. I say he's wrong.

 

No. You could put it anywhere with a remote relocation kit though.

 

jigsaw and a lot of patient.

 

Gigantic spade bit on a large drill.

 

That'll be painful lol

 

I just replaced the starter in my 04 grand Cherokee and it still wont turn over. I replaced the fuse for the ignition as well that was blown. Still wont start. I cant even get power to the car by jump start. Any suggestions on what it may be?????

Jason

 

I have the engine set on top dead center, 0 aligned on the harm balancer. If I rotate that around ONCE is it still on TDC?

 

How do i put a turbo on my 92 XJ and how much will it cost

 

Super easy.

 

Setting Your 4.0 at #1 TDC
　
With #1 spark plug removed, turn the engine over clockwise using the 3/4" front crankshaft bolt. You will see the degree marks on your front cover. Mark the 0 with chalk or white-out.You will see the timing mark on the balancer. Mark it with chalk or white-out. While turning the engine over, put your finger/thumb over #1 spark plug hole. As the mark on the balancer approaches the marks on the front cover, if you are coming up on #1 TDC, pressure in the cylinder will push on your finger. If there's no pressure, you're at #6 TDC and need to crank the engine over until you see the marks coming together and you get pressure. Set the mark on the balancer to the 0 mark on the front cover.

 

He's wrong.

 

X2

 

Duct tape

$2 + turbo

 

Sweet hey thanks man.

 

Will this work on my station wagon?