question about the vacuume ball..found two hoses in my engine bay that arent hooked up to anything on one end..followed them and they run to the front bumper and are hooked up to the vacuume ball. where do i hook the other side of these hoses to?


Edit: its a 87 cherokee 5 speed 4wd 4.0

 

This help?

 

Ok guys, about two weeks ago I replaced my stant 195 degree thermostat with a motorad 195 with jiggler valve. My engine runs much cooler now around 150-170 degrees. Ran right around 210 with the stant without a jiggler valve. Is this a problem or concern? And will lower operating temperature affect mpgs? Should add I checked the thermostat in boiling water and my laser gauge confirms, all temperatures are right.

 

Is it a Fail-Safe stat from MotoRad?

 

No, the high flow.

 

Double

 

52028186 from the dealer hasn't disappointed me yet.

 

I bought the motorad because I thought it was the new OEM supplier, from the thread a year back or so. Guess I have some number crossrefrencing to do tonight. Thanks cruiser.

 

Motorad is the factory supplier, but I don't think they sell the same spec stat in the aftermarket.

 

I doubt they do. Like how cooper sells different brand tires but the cheaper ones are sometimes just that

 

Hey guys my xj just started making a horrible squeaky noise coming from what feels to be almost under the brake pedal/front driver tire area. My tie rod ends are good and so are my ball joints. What could this noise be?

 

When does it happen. Idling. Driving. Flying. During sex, etc. give as much info as possible and well help guide you where to noggin poke.

 

Haha it happens when driving, when I hit bumps in the road, make left turns and sometimes when Im driving straight

 

sound like hub bearing.

 

Same things happening to me all of a sudden. Seemingly throttle related but front end?! Makes no sense. Front end hub bearings?