terrible. You really need long/mid arms or at minimum adjustable short arms

 

Noted for future reference

 

do any of you guys have a stock trackbar that'll work on my 99?
thinkin my adjustable is causing my issues since its for a bigger lift
pm me so we can figure somethin out

 

you still need an adjustable for a lift like that, you need one for 2-4" of lift, not 4-6".

I recommend an IRO double shear adjustable trackbar

 

Another gear question: for spider gears in a Ford rear, do the spiders need to be geared the same as the rest of the diff? In other words, if the diff has 4.56 gearing, would I be able to run stock spiders?

 

spiders have nothing to do with the gearing. The number of the ring gear teeth divided by the number of pinion gear teeth gives the ratio. Stock spiders are fine.

 

yeaaahhh!!
Thanks Dukie.

 

Anyone happen to know what size bolts are needed to hold the Crank Position Sensor to the bellhousing?

 

Ok im completely new to cherokee's and im looking to put a different exhaust on it becuase the one on it now has a leak. My question is whats the best sounding muffler in your opinion on the 4.0. I dont want it loud and annoying but i do want to hear it when im driving=]

 

I could not see in a search whether or not anyone had any clues to how to reattach the rear defroster connector. Where it would normally be attached to the glass grid, it has come loose.

Thanks to all replies.

 

anyone?

 

Okay i need to mount the stock skid plate back on the front of my jeep. Well after we installed the 3inch lift and spaced my sway bar down like the instructions said, my skid plate wont go back on. Do i need to space the skid plate down or what?

 

You could get rid of the spacers on the sway and just use disconnect-able sway bar endlinks... they're available in different lengths in accordance to your lift height.

 

i got a 3inch from rough country. They have the disconnect endlinks but it says its for a 4-6 inch lift?

 

I am attempting to perform the closed to open cooling system on my '90 XJ and was planning on going with the 3 row from radiator barn, but I noticed the core size for the 3 row for the ('92 and later) model I need is nearly an inch shorter in height than the '90 specifications--(31 X 11-1/4 X 1-13/16) for the '90 compared with (31 X 10-5/16 X 1-13/16) for the '92.

The comparison of specs for every other radiator on popular auto sites between the '90 and the '92 radiator shows no such difference, but don't offer the 3-row that I want. Anybody know why, or if it doesn't matter somehow regarding making the swap? Any suggestions for other post-1991 3-row radiators to make the common closed to open cooling swap for my 90 XJ? Thanks very much and any help is greatly appreciated. I'm really in a hurry to get it in for a long trip I hope to make soon with the new system.