Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Newbie
Joined: Sep 2009
Posts: 22
Likes: 0
From: New Hampshire
Year: 1996
Model: Cherokee
Engine: 4.0L I6
re low voltage
Senior Member
Joined: Nov 2009
Posts: 539
Likes: 0
From: McCall,Idaho
Year: 1991
Model: Cherokee
Engine: 4.0L high output with compressed valves
Newbie
Joined: Feb 2011
Posts: 8
Likes: 0
From: Denison, TX
Year: 90 and 91
Model: Cherokee
Engine: 4.0
OK, I found it going to the vac res. behind the bumper. Chilton manuals suck FWIW. I'm assuming the small tube goes to the small nipple on the cruise control but where does the large hose go? It goes up towards the firewall and hits a Y with a plug on one part of the Y and then more hose. Does it go into the firewall somwhere?
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by 00Pajeepcherokee
I should have looked closer.
Member
Joined: Feb 2011
Posts: 223
Likes: 0
From: Oak Park IL
Year: 2000
Model: Cherokee
Engine: I6
Originally Posted by sycoglitch
It's easy to tell the cover is that of a Dana but at the bottom you'll see an extra lil lip at the bottom that is the 8.25 signature to tell them apart
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by RyXJ2000
So why do I have a d35 cover but a c8.25 axel? That's why I've been so confused?!? How can this be?
Senior Member
Joined: Feb 2009
Posts: 850
Likes: 0
From: Roswell, NM
Year: 1997
Model: Cherokee
Engine: 4.0 L
Ok so I know a 8.25 is a non-abs axle and a dana 35 is, question is, if I bolt an 8.25 into my XJ which came with a dana 35, what will I have to do brake wise to make it work? (I don't care about abs)
Senior Member
Joined: Feb 2011
Posts: 921
Likes: 1
From: havelock, nc
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Ok...got a few questions for the wiser Cherokee gear heads....I just upgraded my stock manifold to a rugged ridge header last week, must say a noticeable difference and sound. I am thinkin bout doin some kind of injectors swap now and I have been reading that a good one is some 703s...if true what's a vehicle I could pull em from for my 96..I know I'm looking for like a neon, stratus, or maybe breeze. Next question....I have the 8.25 in the back and d30 up front I believe...I have read that the 29 spline 8.25 is comparable to a d44. With this being said is it really worth doin say an 8.8 upgrade or would re gearin and locking the 8.25 be just as suffice? Note its my dd, 33's and I do moderate wheeling. So those are my questions for now....any advice would be awesome, and don't be afraid to hold back, all advice is much appreciated.
Seasoned Member
Joined: Nov 2010
Posts: 289
Likes: 0
From: Monroe NC
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Originally Posted by ragged1
Will 95 xj tail lights fit a 2000? Somebody hit me in a parking lot. Aarrgghh.
Member
Joined: Jan 2011
Posts: 107
Likes: 0
From: So. Calif.
Year: 1990
Model: Cherokee
Engine: 4.0 IL6
I have a stock 90 Limited with the factory tow package. My rear sits about 1 1/4 inches higher than the front end. I want to level it out. Would ZJ front coils do it??
Last edited by XJ_Libertad; Feb 19, 2011 at 09:49 PM.
Senior Member
Joined: Dec 2010
Posts: 982
Likes: 0
From: seacoast, new hampshire
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by XJeeper193
Nope the 95 is more of a box tail light and 96 and up are different shAped