Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Seasoned Member
Joined: Jan 2013
Posts: 298
Likes: 0
From: Pinehurst
Year: 2000
Model: Cherokee
Engine: H.O. 4.0L I6
Figured it out only wires we dont use are the pwr ant. And some pink one labeled "in int" figured if I didnt know what it did it wasnt important ha jk
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Senior Member
Joined: Nov 2012
Posts: 521
Likes: 0
From: Oregon
Year: 1996
Model: Cherokee
Engine: 4.0
Im getting a pretty good "clunk/thud" when i turn. Not all the time but it seems to be more occuring now. The suspension is only about a month old now. It was retorqued at 100 miles. That was a couple weeks aho. Ideas? My track bar seems to have a weird angle on the joint that connects to the frame, around the round part i seems really angled. The track bar itself is fine its just this connecting part tonthe frame.
That fuse is in the PDC under the hood.
Test to see if you're getting voltage to the relay and out of the relay to the fan. Are you getting power to the fan at all? Are you getting power to the relay at all? Are you getting power on the switch leg of the relay? Does the fan come on when you send ground to the switched leg of the relay?
Are you aware of how a relay works?
Test the sensor at cold and then test if again after you think the fan should be on to be sure it's working.
Test to see if you're getting voltage to the relay and out of the relay to the fan. Are you getting power to the fan at all? Are you getting power to the relay at all? Are you getting power on the switch leg of the relay? Does the fan come on when you send ground to the switched leg of the relay?
Are you aware of how a relay works?
Test the sensor at cold and then test if again after you think the fan should be on to be sure it's working.
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Junior Member
Joined: Jun 2012
Posts: 58
Likes: 0
From: NC, USA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Seasoned Member
Joined: Jan 2013
Posts: 298
Likes: 0
From: Pinehurst
Year: 2000
Model: Cherokee
Engine: H.O. 4.0L I6
thank you i didnt think to look in there. i found the fuse and replaced it and everything works again.
what bulb size is in the front dome light. when i got my jeep i didnt have one in there and i want to get an led bulb. also how do i remove my courtesy light? the one against the passenger side kick panel. and what size bulb is it so i can replace this one also? thank you.
what bulb size is in the front dome light. when i got my jeep i didnt have one in there and i want to get an led bulb. also how do i remove my courtesy light? the one against the passenger side kick panel. and what size bulb is it so i can replace this one also? thank you.
Last edited by mcd58; May 6, 2013 at 09:26 PM.
Seasoned Member
Joined: Mar 2013
Posts: 258
Likes: 0
From: chi-town il
Year: 98
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Mar 2013
Posts: 258
Likes: 0
From: chi-town il
Year: 98
Model: Cherokee
Engine: 4.0




