Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
I had a pcm failure code read a few times recently Checked and refreshed every thing. my gauges are all dead. just before as i was driving the jeep took on a mind of its own and floored the throttle of and on by its self all the gauges were jumping around with the check engine light flashing violently then the jeep shut right down. I started in back up drove about twenty feet did the exact same thing. And now it will not start.
The engine will turn over but no start
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
What is the easiest way to replace factory front LCA's. I know lots of pb but is there a special technique? Off the ground,on the ground?
I bought a used set of almost brand new factory lca to replace my worn out ones. Every time i hit the brakes i can feel the front axle shift back and forth.
I bought a used set of almost brand new factory lca to replace my worn out ones. Every time i hit the brakes i can feel the front axle shift back and forth.
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Junior Member
Joined: Mar 2012
Posts: 95
Likes: 6
From: Pasadena, Ca.
Year: 1990
Model: Cherokee
Engine: 2.5L 4-cyl.
Need size of shaft for new shifter ****...
Found two round, red shifter ***** (w/ shift pattern) that I like for my red 1990 base model but, even though they say they're 'Universal Fit," one of the sellers who has a chart says it won't fit my vehicle. Does anyone know what the millimeter size is of the shaft in my vehicle? I don't have a metric ruler or I'd check myself.
Thanks in advance.
CJ
Thanks in advance.
CJ
CF Veteran
Joined: Aug 2012
Posts: 1,539
Likes: 0
From: ks
Year: 1998
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Yeah they do. Notice how my bumpstop towers are hacked to ****? I run a 12" circumference softball and three hockey pucks on each side. Works very well. Haven't came down on them hard yet but they do compress a little bit... Can't complain, got them for free lol
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
I need to figure out my bumpstops. I only have 1 left in the back.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output