Junior Member
Quote:
Yeah we use those for AC current, current is what kills you lol. I've done a little with them but I've always seen them used in more AC applications like you said, then measuring current as well.
Its the Amps that kill.. not the currentOriginally Posted by 94XjSport94
Yeah we use those for AC current, current is what kills you lol. I've done a little with them but I've always seen them used in more AC applications like you said, then measuring current as well.
Senior Member
Quote:
Roger. Ill get around to checking mine at some point. Its finally warming up over here so im not caring too much now. Summers just around the corner!! HooraahhhOriginally Posted by theyammieguy
Like Salad said, it will be near the blower motor.
Seasoned Member
What is this? I pulled off my bumper off my 99xj and found it. I don't have fog lights or anything it looks factory the wire harness on the left that is. One in the right is for my KC lights
CF Veteran
It's probably the wiring for the fog lights. You can have the wiring while not having a switch or fog lights from the factory. Jeep kinda made the wiring in our jeeps pretty generic.
CF Veteran
Quote:
That for the temp sensor for overhead consoles.Originally Posted by nygiants
What is this? I pulled off my bumper off my 99xj and found it. I don't have fog lights or anything it looks factory the wire harness on the left that is. One in the right is for my KC lights
Junior Member
Quote:
So I get the correct one & install, have the same problem. Voltage is either reading a 1 or like 0.5. So I figure bad ground.... ran a wire from back of the alt to the ground strap at the fire wall & still the same readings
. Also tried to loosen / tighten belt to eliminate that, still same readings of the back of the alt. I checked the 3 wires coming off the plug & red goes ties into main red coming off the back. The other 2 both tan, 1 looks to lead back to the instument cluster ittiot light. The 3rd goes to a small silver electronic box on the passenger side of the inside fender just behind the battery, don't know what it is or if it can be the cause? Please someone 
I posted this late last night & did not get any answers to this can someone help on this??Originally Posted by 88 Thumper
OK guys here is the problem, Sons Comanchee with the 2.5 alt went out only displacing 4.3 volts. replaced it & new one was ok for about 2-3 wks. then battery light was coming on tested it at the back with motor running, 0.54 volts. Returned it to Advanced Auto. Did the bench test & it passed 4 times, did some digging & found out wrong alt because the original had plug input 3 wires at 12 o'clock position & the replacement they gave had plug @ 4 o'clock which put the plug right against the valve cover & a ***** to install.So I get the correct one & install, have the same problem. Voltage is either reading a 1 or like 0.5. So I figure bad ground.... ran a wire from back of the alt to the ground strap at the fire wall & still the same readings
. Also tried to loosen / tighten belt to eliminate that, still same readings of the back of the alt. I checked the 3 wires coming off the plug & red goes ties into main red coming off the back. The other 2 both tan, 1 looks to lead back to the instument cluster ittiot light. The 3rd goes to a small silver electronic box on the passenger side of the inside fender just behind the battery, don't know what it is or if it can be the cause? Please someone
CF Veteran
Quote:
That for the temp sensor for overhead consoles.
So where does the other end of the wire go? I want to put an overhead console in.Originally Posted by DieselD
That for the temp sensor for overhead consoles.
CF Veteran
One end goes to a temp sensor (behind the bumper) I imagine the other end runs up into the rest of the wiring harness to the consoles connector? Lol.
CF Veteran
Quote:
Does mine have a connector if my xj never came with a overhead console.Originally Posted by DieselD
One end goes to a temp sensor (behind the bumper) I imagine the other end runs up into the rest of the wiring harness to the consoles connector? Lol.
CF Veteran
On my 99, it didn't come with an OHC, but the wiring by the bumper was there. Don't know about up in the headliner, I have a sunroof soooo...
