Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
sounds like the timing is off 180 degrees. Turn the distributor around and try again. Make sure the hole in the distributor and cam sensor are lined up and the engine #1 is at TDC when you re-install it.
Member
Joined: Apr 2010
Posts: 158
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0
So I recently looked at my wheel bearings on my 89 Laredo, which are shot and destroyed. I'm trying to take my hub assembly out. This is on the passenger side. Caliper, rotor, and wheel studs are off already. The 2 or 3 bolts have been removed but the last top bolt holding my hub assembly is rusted in and the head on the bold is completely stripped. I have my extracting kit but so far they are barely drilling through. I got mad and decided to try and destroy the outer hub assembly by trying to chisel everything out. Idk what to do anymore. Any suggestions???
Then soak the seam between the hub and the knuckle with penetrate.
With any luck you should now be able to get the hub off.
Last edited by jeep3200; Mar 15, 2012 at 09:56 PM. Reason: correct typo
Junior Member
Joined: Jun 2010
Posts: 35
Likes: 0
From: Camp Lejeune
Year: 1990
Model: Cherokee
Engine: 4.0 inline 6
Originally Posted by vip01hp2
hi i have a 1993 cherokee and i have replace everything i can on my motor complete redone and i got in started and im getting smoke in the valve cover and there are ruber hoses that feed to the air box so the motor dieds after a few secound please help?
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
So I recently looked at my wheel bearings on my 89 Laredo, which are shot and destroyed. I'm trying to take my hub assembly out. This is on the passenger side. Caliper, rotor, and wheel studs are off already. The 2 or 3 bolts have been removed but the last top bolt holding my hub assembly is rusted in and the head on the bold is completely stripped. I have my extracting kit but so far they are barely drilling through. I got mad and decided to try and destroy the outer hub assembly by trying to chisel everything out. Idk what to do anymore. Any suggestions???
I recommend the Irwin ones
Newbie
Joined: Dec 2011
Posts: 5
Likes: 0
From: Qatar
Year: 1996, 2000
Model: Cherokee
Engine: 6IL
hello am new here from Doha Qatar...yesterday while driving in a bumpy road, my blower fan (A/C) suddenly stop working. after careful check, the fan is working still but very slow. I already changed the resistor and I connected the blower fan directly to the battery and found out fan is ok.
Any idea what seems to be the problem? any help greatly appreciated. Thanks.
Any idea what seems to be the problem? any help greatly appreciated. Thanks.
Seasoned Member
Joined: Jul 2011
Posts: 259
Likes: 1
From: Pulaski, IA
Year: 1990
Model: Cherokee
Engine: Straight 6
Newbie
Joined: Jun 2011
Posts: 26
Likes: 0
From: florida
Year: 1993
Model: Cherokee
Engine: 4.0
hi i have a 1993 cherokee and i have replace everything i can on my motor complete redone and i got in started and im getting smoke in the valve cover and there are ruber hoses that feed to the air box so the motor dieds after a few secound please help?
Seasoned Member
Joined: Jan 2011
Posts: 295
Likes: 0
From: Roscoe, IL
Year: 2000
Model: Cherokee
Engine: 4.0L 242 Power Tech I6
Would 30x9.5's fit on a 15x8 rim? That's what I've got now.. Looking to go larger/wider in the future.. Trying to pickup some cheap Black Rock steelies. I know i can fit wider on a 7". But, I'd prefer the wider rim..
..any opinions?
..any opinions?
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Oct 2011
Posts: 823
Likes: 0
From: Raleigh,NC
Year: 1992
Model: Cherokee
Engine: 4.0L HO
get the 15x8. A 9.5 wide tire will be fine on it. You'll be happier when you step up to a wider tire.
Newbie
Joined: Feb 2012
Posts: 7
Likes: 0
Model: Cherokee
hey i am new to 4x4's still learning a few things....drove to work this afternoon and i swore it felt like the front wheels were gonna shake right off the jeep so for the 10 mile commute i drove 35mph i'm thinkin tie rods...any thoughts or suggestions?? PS: HELP
Senior Member
Joined: May 2011
Posts: 950
Likes: 0
From: Newman, Lake WA
Year: 1989
Model: Cherokee
Engine: 4.0 I6 cold air
Originally Posted by haggard88xj
hey i am new to 4x4's still learning a few things....drove to work this afternoon and i swore it felt like the front wheels were gonna shake right off the jeep so for the 10 mile commute i drove 35mph i'm thinkin tie rods...any thoughts or suggestions?? PS: HELP