Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Seasoned Member
Joined: Mar 2012
Posts: 312
Likes: 0
From: Tennessee
Year: 1998
Model: Cherokee
Found in 1998 parts fiche
2 06034795 2 EN0 DBB SCREW, Hex Head, .375-16x2.00, Clutch Housing to Spacer Plate, Mounting
4 06100952 2 EN0 DBB SCREW, Hex Head, M12-1.75x55, Clutch Housing to Spacer Plate, Mounting
6 06100345 2 EP0 DBB SCREW AND WASHER, Hex Flange Head, M12x1.75x45, Clutch Housing to Engine Block, Mounting
10 11504922 2 EP0 DBB BOLT , Hex Head, M12x1.75x50, Clutch Housing to Engine Block, Mounting
11 34201837 2 EP0 DBB BOLT , Hex Flange Head, M12x1.75x90, Clutch Housing to Engine Block, Mounting
The 3/8 bolts (#2) are the two at the top.
2 06034795 2 EN0 DBB SCREW, Hex Head, .375-16x2.00, Clutch Housing to Spacer Plate, Mounting
4 06100952 2 EN0 DBB SCREW, Hex Head, M12-1.75x55, Clutch Housing to Spacer Plate, Mounting
6 06100345 2 EP0 DBB SCREW AND WASHER, Hex Flange Head, M12x1.75x45, Clutch Housing to Engine Block, Mounting
10 11504922 2 EP0 DBB BOLT , Hex Head, M12x1.75x50, Clutch Housing to Engine Block, Mounting
11 34201837 2 EP0 DBB BOLT , Hex Flange Head, M12x1.75x90, Clutch Housing to Engine Block, Mounting
The 3/8 bolts (#2) are the two at the top.
CF Veteran
Joined: Feb 2009
Posts: 2,203
Likes: 3
From: Houston Tx.
Year: 1995
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Nov 2012
Posts: 285
Likes: 0
Model: Cherokee
Installed a 62 mm throttle body then started the jeep up and it was idling at 2000 Rpms, I take it that's not normal. I would have liked to not have wasted $100 so can someone tell me what is wrong?
99 xj 4.0
99 xj 4.0
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Yep... I think Rock Auto had them on for 69 cents a couple weeks ago. Parts store likely has them on hand, I imagine shipping on a single paper gasket isn't ideal lol
Check the IAC gasket too.
Check the IAC gasket too.
Seasoned Member
Joined: Nov 2012
Posts: 285
Likes: 0
Model: Cherokee
Or could it be that the computer has to learn it? I tried again and drive it and it was very inconsistent but at one loin I shifted into reverse and it jumped up to 2700 Rpms so I shut it off and the rest of the way home it didn't do anything out of the normal
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
No that's a vacuum leak or you messed up the IAC. You can try disconnecting the battery for a few minutes, the PCM might reset the IAC's position.
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
What's wrong with your engine? Don't say "it has 150k miles and ticks slightly", lol
Seasoned Member
Joined: Nov 2012
Posts: 285
Likes: 0
Model: Cherokee
[QUOTE="salad;2720756"] IAC is the stepper motor on the side closest to the engine. What do you mean you "had to switch one"??? You didn't use your original accessories on the TB?
I thing the TB came off a zj and one if the plugs were different. I just switched the plug from the stock throttle body to the 62mm one. It was the plug on the back left side if you're looking at the engine
I thing the TB came off a zj and one if the plugs were different. I just switched the plug from the stock throttle body to the 62mm one. It was the plug on the back left side if you're looking at the engine