Sep 21, 2015, 02:17 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
CF Veteran
Joined: Dec 2011
Posts: 1,467
Likes: 0
From: Wilmington, nc
Year: 1998
Model: Cherokee
Engine: Inline 6
I have a question about gears and pinions, I want to swap my gears for 4.10, can I just pull 4.10 from another vehicle and put it in my crystler 8.25
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
no has to be from an XJ - a 97-01 XJ with the c8.25 in your case. Very few if any came with that gearset from the factory so you're better off just buying some new, or finding some in the forum classifieds.
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
CF Veteran
Joined: Dec 2010
Posts: 1,246
Likes: 1
From: Missouri
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Originally Posted by dukie564
lol yea that's def not right. What's the other end look like????
looks like they sent you the wrong trackbar that one's for a lot bigger lift
looks like they sent you the wrong trackbar that one's for a lot bigger lift
CF Veteran
Joined: Jan 2010
Posts: 5,482
Likes: 25
From: Virginia Beach by way of Michigan
Originally Posted by Nperryman
Something doesn't seem right. 4.5" lift, pro comp adjustable track bar. Should I put more washers above the joint? Do I have the bar upside down? It seems that the top curve is too high.
CF Veteran
Joined: Dec 2010
Posts: 1,246
Likes: 1
From: Missouri
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Originally Posted by no rdplz
Definitely looks wrong. Looks like the wrong track bar (too big). The bracket end should look like this...
CF Veteran
Joined: Feb 2012
Posts: 1,424
Likes: 4
From: Boone, NC
Year: 1998
Model: Cherokee
Engine: 4.0L
Ive only found gears as low as 4.56 for c8.25. Dont think they make and lower for aftermarket and not sure if any vehicles that used it had 4.10s
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by armymedic120
I have a question about gears and pinions, I want to swap my gears for 4.10, can I just pull 4.10 from another vehicle and put it in my crystler 8.25
Member
Joined: Jun 2010
Posts: 247
Likes: 0
From: Soddy Daisy, TN
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by larryftmfw
Adjusted my track bar and now my steering wheel is crooked when I'm driving straight. How do I adjust that
http://www.4x4xplor.com/alignment.html
You're gonna do the second part. I jacked up the front end (Idk if it helped or not) then soaked it in PB blaster and turned it with vice grips. Look at your steering wheel periodically to see where you're at. Then tighten everything back up.
