Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Old Sep 21, 2015, 03:49 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: General Overview
Print Wikipost

XJ Ask the Question Thread

Thread Tools
 
Search this Thread
 
Old Aug 31, 2016 | 09:30 AM
Share
  #55891  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by dave1123
Try one thing first. See if it was taken apart in the splined section and put back together "out of phase", that is the u-joint yokes are not aligned. If you lay the shaft on a flat surface, the double-carden caps and the front caps should be parallel with each other, not rotated. If you get the splines misaligned, it can cause vibration.
do you have a picture of what you mean? Because when I got my jeep back from getting gears the boot over the splines was ripped so I can only assume it was taken apart.
Old Aug 31, 2016 | 09:31 AM
Share
  #55892  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by Basslicks
Have you considered taking it to a driveshaft shop and having it balanced? Doesn't cost much at all.
I was told it would be $50 and a week or so but I guess I could just drop it off and use the spare if I have to.
Old Aug 31, 2016 | 11:45 AM
Share
  #55893  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
About how long would it take to pull my transfercase, rebuild and reinstall?
Old Aug 31, 2016 | 11:56 AM
Share
  #55894  
XJwonders's Avatar
XJwonders
CF Veteran
Premium Member
 
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Default
Originally Posted by SatiricalHen
About how long would it take to pull my transfercase, rebuild and reinstall?
I swap t cases in 3-4 hours laying on flat ground, and rebuilding a t case usually take less than 2 hours for me. But for a beginner, plan on 4 hours. So approximately 8-9 hours
Old Aug 31, 2016 | 12:04 PM
Share
  #55895  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by XJwonders
I swap t cases in 3-4 hours laying on flat ground, and rebuilding a t case usually take less than 2 hours for me. But for a beginner, plan on 4 hours. So approximately 8-9 hours
so it can be done in a day/weekend? It's starting to leak worse than I like and the parts are coming in but I don't have a back up car so I need to go home one weekend get it all apart and back together before the following week
Old Aug 31, 2016 | 12:11 PM
Share
  #55896  
XJwonders's Avatar
XJwonders
CF Veteran
Premium Member
 
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Default
Yes if u are mechanically inclined
Old Aug 31, 2016 | 12:19 PM
Share
  #55897  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
I'd aim to pull it and drain the fluid on a Friday night, and you should be finished by dinner Saturday. But that'll give you an extra day if needed
Old Aug 31, 2016 | 12:34 PM
Share
  #55898  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by XJwonders
Yes if u are mechanically inclined
I put the sye in it so it won't be my first time opening it up. I've never gone all the way into so any tools you recommend I buy/rent? I'm definitely getting some lock ring pliers because that was the hardest part of the sye using two screwdrivers.
Old Aug 31, 2016 | 12:36 PM
Share
  #55899  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by NewKindOfClown
I'd aim to pull it and drain the fluid on a Friday night, and you should be finished by dinner Saturday. But that'll give you an extra day if needed
seems like a pretty good idea, I really hope all the parts are here this weekend but I doubt it.
Old Aug 31, 2016 | 01:36 PM
Share
  #55900  
salad's Avatar
salad
Herp Derp Jerp
Premium Member
 
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Default
Originally Posted by SatiricalHen
I was told it would be $50 and a week or so but I guess I could just drop it off and use the spare if I have to.
If the front driveshaft is in just put it in 4WD. Unless you have a '95 with the stupid external seal.
Old Aug 31, 2016 | 02:46 PM
Share
  #55901  
SatiricalHen's Avatar
SatiricalHen
CF Veteran
 
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Default
Originally Posted by salad
If the front driveshaft is in just put it in 4WD. Unless you have a '95 with the stupid external seal.
The front shaft is the one I'm trying to replace, I already have a tom woods coming in for the rear.
Old Aug 31, 2016 | 07:29 PM
Share
  #55902  
salad's Avatar
salad
Herp Derp Jerp
Premium Member
 
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Default
Originally Posted by SatiricalHen
The front shaft is the one I'm trying to replace, I already have a tom woods coming in for the rear.
Did you write that or am I not paying attention enough? I feel like I'm losing it sometimes lol
Old Aug 31, 2016 | 08:11 PM
Share
  #55903  
cherokee104's Avatar
cherokee104
Junior Member
 
Joined: Dec 2010
Posts: 84
Likes: 3
From: SOMERTON ARIZONA
Year: 2000
Model: Cherokee
Engine: 4.0
Default
Anybody know or is selling a pair of jeep yj full doors in oem color white?
Old Aug 31, 2016 | 08:12 PM
Share
  #55904  
cherokee104's Avatar
cherokee104
Junior Member
 
Joined: Dec 2010
Posts: 84
Likes: 3
From: SOMERTON ARIZONA
Year: 2000
Model: Cherokee
Engine: 4.0
Default
Originally Posted by cherokee104
Anybody know or is selling a pair of jeep yj full doors in oem color white?
From years 1994-1995 thanks
Old Aug 31, 2016 | 08:12 PM
Share
  #55905  
XJwonders's Avatar
XJwonders
CF Veteran
Premium Member
 
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Default
Originally Posted by cherokee104
Anybody know or is selling a pair of jeep yj full doors in oem color white?
wrong forum, buddy



Advanced Search

All times are GMT -5. The time now is 09:58 AM.