Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Old Sep 21, 2015, 03:49 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: General Overview
Print Wikipost

XJ Ask the Question Thread

Old May 7, 2016 | 05:39 PM
  #54016  
rcguymike's Avatar
CF Veteran
 
Joined: Aug 2015
Posts: 1,226
Likes: 11
From: Laurium, MI
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L
Default

Originally Posted by rcguymike
So my airbag light is on now and my '99 has never had the Jeep recall #860 fix applied. Dealer says it's such an old recall that there aren't any parts available to apply the proper fix. Should I contact corporate to see if they have a fix or should I ignore it? Not really excited to randomly have the airbags go off.
Originally Posted by Lickwid46_zj
Mine does the same thing didnt know there was a recall on them ima have to look into this now lemme know how it plays out for u
Originally Posted by rcguymike
OK. You can enter your VIN here http://recalls.mopar.com and it'll tell you everything that hasn't been fixed.
Well looky there...light just went off...must've needed a bit more time to dry out after almost sinking it...lol

Last edited by rcguymike; May 8, 2016 at 10:28 AM.
Old May 7, 2016 | 07:26 PM
  #54017  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Intermittent problem, feels like binding on acceleration from a stop. I get a couple pops accompanied by hesitation, and then all is normal.

I know the transmission is on its way out. Thoughts?
Old May 7, 2016 | 07:47 PM
  #54018  
my89xj's Avatar
CF Veteran
 
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Originally Posted by jdjonesdr
Hey guys,
I'm going to throw this up on the parts wanted thread as well, but I thought I'd run it by folks here first.

I'm looking for a MAP sensor for my 90. I suspect the one I have now is not the correct one, since it has a "Rube Goldburg" connection at the throttle body.

Anybody got one they want to sell or know where I can buy a new one?

Here's a pic of one borrowed from another thread.
https://www.cherokeeforum.com/attach...ap-tb-hose.jpg
Originally Posted by NewKindOfClown
Good luck on the Renix era tube for '87-90. Maybe Cruiser has one laying around, but they haven't produced them for over a decade. Most I find in junkyards are broken
Originally Posted by Basslicks
You need the sensor or the tube?

The sensors are had easily on any site that would ship to ya... I get mine from rockauto.com.

As far as the tube goes, check out Moparpartsoverstock.com - that's where I found the replacement for my '92.
Like this I have 3
Attached Thumbnails XJ Ask the Question Thread-1462668386539.jpg  
Old May 7, 2016 | 07:49 PM
  #54019  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by my89xj
Like this I have 3
I thought of you when I posted that
Old May 7, 2016 | 07:52 PM
  #54020  
my89xj's Avatar
CF Veteran
 
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Originally Posted by NewKindOfClown
I thought of you when I posted that
Grab one every chance I get. Is your kick down cable adjusted correctly? Thought I'd ask. Otherwise I'd say governor pressure sensor or plain mechanical failure.
Old May 7, 2016 | 08:03 PM
  #54021  
BlueJeep_01's Avatar
Newbie
 
Joined: Sep 2015
Posts: 28
Likes: 1
From: Maine
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Im looking to hang an American flag from the roof/ceiling of my cherokee (essentially as a headliner cover lol). Anyone have ideas of what I can use to keep it up and fasten it enough so it won't come off while driving with the windows down?
Old May 7, 2016 | 08:13 PM
  #54022  
my89xj's Avatar
CF Veteran
 
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Originally Posted by BlueJeep_01
Im looking to hang an American flag from the roof/ceiling of my cherokee (essentially as a headliner cover lol). Anyone have ideas of what I can use to keep it up and fasten it enough so it won't come off while driving with the windows down?
Don't be ghetto, remove the old headliner fabric and properly glue that flag up.
Old May 7, 2016 | 10:12 PM
  #54023  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by BlueJeep_01
Im looking to hang an American flag from the roof/ceiling of my cherokee (essentially as a headliner cover lol). Anyone have ideas of what I can use to keep it up and fasten it enough so it won't come off while driving with the windows down?
If you're trying to honor the flag, don't do it at all. I know a lot of people here will come back saying the US Flag Code isn't legally binding because US vs Eichman overturned it, and blah blah blah.

But the Flag Code still exists as a guideline for respecting it. See (f) below:

XJ Ask the Question Thread-screenshot_20160507-230602.png
Old May 7, 2016 | 10:49 PM
  #54024  
Freakn's Avatar
Junior Member
 
Joined: Aug 2015
Posts: 43
Likes: 0
From: Mackay Australia
Year: 1995
Model: Cherokee
Engine: 4.0
Default

I'm hoping I just found the coarse of my increased fuel consumption, was only getting 425 km from 65 litres ( 15 mpg i think) when i used to get 550 km from that much ( 20 mpg ish).

Found the vacuum line that goes to a tee and then feeds the cruise control and a canister behind the bumper (need to work out what that is) had broken, lets hope that helps with the fuel usage now.

Also should there be much play (wobble) with the distributor shaft where the rotor sits on, moves probably a 1/16th inch
Old May 7, 2016 | 10:50 PM
  #54025  
BlueJeep_01's Avatar
Newbie
 
Joined: Sep 2015
Posts: 28
Likes: 1
From: Maine
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Originally Posted by NewKindOfClown

If you're trying to honor the flag, don't do it at all. I know a lot of people here will come back saying the US Flag Code isn't legally binding because US vs Eichman overturned it, and blah blah blah.

But the Flag Code still exists as a guideline for respecting it. See (f) below:
Good call. Wouldn't want to be disrespectful in any sense.
Old May 7, 2016 | 10:56 PM
  #54026  
NewKindOfClown's Avatar
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default

Originally Posted by Freakn
a canister behind the bumper (need to work out what that is)
Vacuum reservoir. It primarily helps with cruise control and selection of heater vents
Old May 7, 2016 | 11:03 PM
  #54027  
Freakn's Avatar
Junior Member
 
Joined: Aug 2015
Posts: 43
Likes: 0
From: Mackay Australia
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by NewKindOfClown
Vacuum reservoir. It primarily helps with cruise control and selection of heater vents
Ok Thanks

I'm also hoping this will help with my intermitant miss that goes away once it warms up but can start any time also. Cleaning the dist cap and rotor has helped a bit I think (need to order a new set i think)
Old May 8, 2016 | 08:08 AM
  #54028  
jdjonesdr's Avatar
Seasoned Member
10 Year Member
Liked
 
Joined: Oct 2012
Posts: 328
Likes: 5
From: Dominican Republic
Year: 1990
Model: Cherokee
Engine: inline 6
Default

Originally Posted by my89xj
Like this I have 3
I'm liking that "Tywrap hose clamp" on that baby.
Old May 8, 2016 | 05:50 PM
  #54029  
93XJeeper's Avatar
CF Veteran
10 Year Member
 
Joined: Feb 2015
Posts: 1,528
Likes: 2
From: North Carolina
Year: 1993
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Mr. Pink
No, and no. the components are designed vehicle specific.
alright, I went and looked at the ZJ today, the Cruise control won't work for sure but the AC. Wouldn't it be able to work cause all there is, is a wire that turns the AC compressor on and off. So couldn't I just cut and splice the ZJ pigtail in to make it fit. And I also understand that I would have to make custom bracket to mount everything. Only Thing I'm unsure about is that the ZJ has a plug going into the top of the AC dryer, I'm guessing low pressure cut off switch? Could I just cut and splice that pigtail too?

Last edited by 93XJeeper; May 8, 2016 at 05:58 PM.
Old May 8, 2016 | 09:59 PM
  #54030  
Mr. Pink's Avatar
CF Veteran
 
Joined: Oct 2012
Posts: 1,127
Likes: 0
From: Capac, Mi
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

i wouldnt recommend it. you can do it, but it will be the failure point in the system. not to mention the lines and the evap and the condensor are all vehicle specific. as is the Accumulator

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:08 AM.