Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Ack!
.png?width=&height=810)
Not sure which diagram. Am away from home so can't dig up stuff for a day or two. You mean the diagram with the headlamp delay module? Shouldn't be tooo many pages back... Try a Google search
.png?width=&height=810)
Not sure which diagram. Am away from home so can't dig up stuff for a day or two. You mean the diagram with the headlamp delay module? Shouldn't be tooo many pages back... Try a Google search
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Here's a weird one, jeep has been sitting since November. Started up and ran at least once a month while doing floor boards and front end. Went to go start it today, and nothing, no crank at all.. here's the twist, I have an aftermarket alarm system, and I decided to see if it started with the remote, and it did. So using the key in the ignition, and I hear the fuel pump and relay kick on, but still no crank with key. Suggestions
I assume this is an automatic XJ. Try starting it in Neutral. If that doesn't pan out check out one of the zillion "no crank" threads here.
Installed Wagner Thermoquiets on the front brakes today. Have a slight oscillating brushing sound coming from the right disc now though when I drive. Sound happens faster as i drive faster and the opposite. Goes away when I apply the brakes with some force. Any ideas? Did not replace rotors
Its possible that the rotor may be slightly warped but if your brake pedal doesn't pulsate I wouldn't be concerned. When replacing the pads its a good idea to do rotors, at least get them machined.
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Asked the local place what it would cost to turn my rotors and they said like $40-50. I wouldve gotten new ones but im trying to keep a budget
CF Veteran
Joined: Nov 2013
Posts: 1,347
Likes: 0
From: Wetumpka, AL
Year: 1987
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Can you spraypaint over rusted spots? I sprayed my sliders with rustoleum bedliner and ive been getting small rust dots from my shoes and my tires throwing up gravel. Wanted to just touch it up but im not sure about spraying over rust







otherwise I like bedliner