Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Old Sep 21, 2015, 03:49 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: General Overview
Print Wikipost

XJ Ask the Question Thread

Thread Tools
 
Search this Thread
 
Old Jun 2, 2013 | 08:43 AM
  #31306  
94XjSport94's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Default

Originally Posted by cruiser54

Are you related to our Chinese parts supplier? WunHungLo?
Yes. I just didn't know who to ask.
Old Jun 2, 2013 | 09:15 AM
  #31307  
NewJerseyXJ609's Avatar
CF Veteran
 
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
Default

So I go out to buy myself a new series belt today. Of course I go with a gator belt but the only store around me only has one. And they say it's for "right hand drive belt accessory".... What the hell does that mean? Lol I've never heard of this before

They have a" left hand drive belt accessory" option too but none in stock...

Is
Old Jun 2, 2013 | 09:38 AM
  #31308  
dwilly's Avatar
Member
 
Joined: Jan 2013
Posts: 126
Likes: 0
From: hambleton, wv
Year: 1997
Model: Cherokee
Engine: 4.0
Default

Well... I knew I had to replace muffler ended up replace the cat muffler and o2 sensor. Anywa I still have to replace the upper balljoint on driver side and sway bar bushings, is that hard to knew? I've never done it before.
Old Jun 2, 2013 | 10:08 AM
  #31309  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

Shouldn't be too hard.

If you're doing ball joints, just do them all. Rent/borrow/buy a ball joint press.
Old Jun 2, 2013 | 12:51 PM
  #31310  
Klaatu55's Avatar
Junior Member
 
Joined: Jul 2011
Posts: 35
Likes: 0
From: New York
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Problem: Jeep Motor Dies.

1.My 1999 Cherokee 4.0 won’t start or run by key.
2. When key is turned to on all lights on dash work. Upon turning further to start, all
lights go off as normal But jeep won’t crank.
3. Door locks work. Headlight’s work. All electricals work
4.When key is turned to start. Clicking (relay?) is heard in area? of passenger side fuse
box.
5 No crank, No start
6. It does have a Viper alarm with remote start. This model is a couple of years. Always had one. No real trouble.

When Remote control start is used.
  • Jeep cranks and Engine starts Normally
  • When brake pedal is depressed to shift to drive, truck cuts off.(Which it should do if key is not in ignition switch turned to on. But key is in and turned to on.)
  • Alarm Works normally. Alarm switches into and out of valet mode. Tells cabin temperature ,the whole nine.
  • Power Distribution Center Fuses and relays are all good. (relays have been switched, Fuses have been checked for continuity.)
  • Interior Fuse Panel fuses 10,11,19 and 25 are good)
Starter is 2 months old and starts instantly with remote start.
Battery is 1 month old reading 12.65 volts.

Disconnecting battery for 20 minutes and reconnecting did nothing.
I have jiggle shift lever between neutral and park and drive. No difference (suspecting NSS)
There are several fuses in power distribution center that I cannot find identification for. They are not identified in owner’s manual, or under the cover of PDC in engine compartment. Any help in identifying these fuses will be welcomed.

I thinking problem may be in ignition switch. Method to test ignition or point to a relay that may be suspect would be appreciated.

Reasoning is: 1.the circuit that the remote start uses to start and run the jeep is okay but the part of the circuit from the key switch to start and run the car is not working.

Anyone know what alternate side of the street parking means? Thanks in Advance
Old Jun 2, 2013 | 12:58 PM
  #31311  
Greenwire6's Avatar
Seasoned Member
 
Joined: Dec 2010
Posts: 358
Likes: 0
From: Stevensville, Maryland
Year: 1994
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by Klaatu55
Problem: Jeep Motor Dies.

1.My 1999 Cherokee 4.0 won’t start or run by key.
2. When key is turned to on all lights on dash work. Upon turning further to start, all
lights go off as normal But jeep won’t crank.
3. Door locks work. Headlight’s work. All electricals work
4.When key is turned to start. Clicking (relay?) is heard in area? of passenger side fuse
box.
5 No crank, No start
6. It does have a Viper alarm with remote start. This model is a couple of years. Always had one. No real trouble.

When Remote control start is used.

[*]Jeep cranks and Engine starts Normally[*]When brake pedal is depressed to shift to drive, truck cuts off.(Which it should do if key is not in ignition switch turned to on. But key is in and turned to on.)[*]Alarm Works normally. Alarm switches into and out of valet mode. Tells cabin temperature ,the whole nine.[*]Power Distribution Center Fuses and relays are all good. (relays have been switched, Fuses have been checked for continuity.)[*]Interior Fuse Panel fuses 10,11,19 and 25 are good)

Starter is 2 months old and starts instantly with remote start.
Battery is 1 month old reading 12.65 volts.

Disconnecting battery for 20 minutes and reconnecting did nothing.
I have jiggle shift lever between neutral and park and drive. No difference (suspecting NSS)
There are several fuses in power distribution center that I cannot find identification for. They are not identified in owner’s manual, or under the cover of PDC in engine compartment. Any help in identifying these fuses will be welcomed.

I thinking problem may be in ignition switch. Method to test ignition or point to a relay that may be suspect would be appreciated.

Reasoning is: 1.the circuit that the remote start uses to start and run the jeep is okay but the part of the circuit from the key switch to start and run the car is not working.

Anyone know what alternate side of the street parking means? Thanks in Advance
Ive replaced my ignition switch several times. Granted mine is a 94. Wipers, radio etc dont work. And the engine doesnt crank at all when it goes bad.
Old Jun 2, 2013 | 12:59 PM
  #31312  
Call-_me-Jordan's Avatar
Senior Member
 
Joined: Apr 2013
Posts: 663
Likes: 0
From: Hahira,Ga
Year: 2001
Model: Cherokee
Engine: 4.0 I6
Default

Which member on here built this bumper? I know I have seen it around just cant find it.

Name:  28F2BB08-005D-4BFB-9E05-E817737EE37D-21990-00000269DA0CC467_zps62aaa75e.jpg
Views: 28
Size:  142.2 KB


Name:  018F89A8-EF6A-46BA-97A0-F26E1241F220-21990-00000269D70C75D6_zps03ef9448.jpg
Views: 25
Size:  176.8 KB
Old Jun 2, 2013 | 01:05 PM
  #31313  
ccooper1234's Avatar
CF Veteran
 
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Default

Anyone know of any good exhaust shops in or near Virginia Beach?
Old Jun 2, 2013 | 02:02 PM
  #31314  
wiggles's Avatar
CF Veteran
 
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Call-_me-Jordan
Which member on here built this bumper? I know I have seen it around just cant find it.
That thing is ugly and simple, just rectangular tubing
Old Jun 2, 2013 | 02:33 PM
  #31315  
Call-_me-Jordan's Avatar
Senior Member
 
Joined: Apr 2013
Posts: 663
Likes: 0
From: Hahira,Ga
Year: 2001
Model: Cherokee
Engine: 4.0 I6
Exclamation

Originally Posted by wiggles
That thing is ugly and simple, just rectangular tubing
Was trying to find out what he made the mounting brackets out of.
Old Jun 2, 2013 | 02:59 PM
  #31316  
bheath's Avatar
CF Veteran
 
Joined: Jul 2011
Posts: 4,521
Likes: 1
From: JOCO
Year: 1999
Engine: 4.0 Inline 6
Default

Originally Posted by Call-_me-Jordan

Was trying to find out what he made the mounting brackets out of.
Im sure it's either 1/4" flat stock or 3/16" flat stock. Many companies sell em.
Old Jun 2, 2013 | 03:00 PM
  #31317  
wiggles's Avatar
CF Veteran
 
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Call-_me-Jordan

Was trying to find out what he made the mounting brackets out of.
1/4" plate is the usual
Old Jun 2, 2013 | 04:34 PM
  #31318  
RSWiser's Avatar
Member
 
Joined: Dec 2011
Posts: 226
Likes: 2
From: Utah
Year: 1999
Model: Cherokee
Engine: 4.0
Default

I just installed new electric fans. It requires wiring to an ignition on source under the hood.

What is a good 30-40 amp source. And where. Right now I have the wire attached to a fuse.

Fairly mechanical but electrically challenged.
Thanks.
Old Jun 2, 2013 | 04:44 PM
  #31319  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Originally Posted by Call-_me-Jordan
Was trying to find out what he made the mounting brackets out of.
http://www.ajsoffroadarmor.com/produ...roductid=17573
Old Jun 2, 2013 | 06:27 PM
  #31320  
jx2991's Avatar
Member
 
Joined: Feb 2011
Posts: 206
Likes: 0
From: Kuna, ID
Year: 1992
Model: Cherokee
Engine: 4.0L
Default

What size heater hose does everybody use? I need to replace mine but can't find a parts store that sells the 11/16 that's in it. Can someone tell me an alternative size or where I can buy 11/16?



All times are GMT -5. The time now is 10:20 PM.