Have to modify it

 

No but a ZJ one will fit with a very slight modification to the mounting holes

 

Hello, I've heard that the 1996 Cherokees had the fuel pressure regulator built into the fuel pump, and that new units are unavailable. Does anyone know if this is true, and know where I might find one? Thanks, John

 

What's the typical cost of a set of wj knuckles?

 

Knuckles themselves or the conversion?

Knuckles I would pay $60 for em

 

how much would i have to modify it. i found one on craiglist from a 91 and would like to use it on my jeep.

 

I'm in the middle of installing my v8 zj tie rod.. Anyone know the torque specs off hand?

 

NicE and snug

 

Can anyone point me in the right direction of someone who has modified their 4.0l and the gains they got? Thanks.
I've looked on Google already...

 

I got +500hp from a throttle bottle spacer

 

Yeah that's usually my motto.. Or tight and then a quarter turn.. But for critical items like steering I'd like to torque them to spec.. Do you know them?

 

A lot. Unless you're very handy with a welder and have bits of steel lying around (in otherwords, could just make your own if you felt like it) it's not worth it.

 

What kind of modifications? Stickers or forced induction?

Tip: look for the word "stroker"

 

And get two more full-time jobs.

 

I need help.. I went to wire a fan up to a new Single stage electrical fan controller. It came with a thermostat control switch that I screwed into the spot where the coolant temperature sensor went. Thinking I would just cut the wires and tie it altogether. Thinking I was done and the new thermostat control would operate both fans and send the right signal to run and went to crank my heep. And now I have no spark. I'm lost. I think I've tested everything but im missing something cuz I still have no spark. Fuel good. Cps new. She was running just fine till I started this Project.