I just installed longer lca's on my jeep without a ratchet strap. I bolted the passenger side lca into the body mount, then I took one of the mounting bolts and simply slide it through the lca axle mount on the driver side. Then I took a long pry bar/cheater tube and slide it between the axle tube and the lca bolt. When you pull up on the bar the axles caster positively increases. I put a floor jack under the end of the cheater bar and jacked it up until the passenger side lca slide right into the axle mount. Once that one is bolted in remove the floor jack and the other lca should pop right in place.

 

Just got the other one coil time

 

Your putting the coils in after you bolted up the arms? Good luck

 

Got em learned from the best

 

This is how I did my IRO 3" ones. Come along to the bumper and tighten as such

 

Congrats. Where you located btw just curious cause I'm on my iPod

 

Click where it says "ask the question thread"

Then it will take you to the site.

 

Lol I always forget the too bar is the link to the full site. :carryon:

 

Lol noob.... Jk

 

lol

 

hey guys my 96 cherokee just started making a cherping noie and i cant figure it out, any ideas as to what it might be?

 

Check the Pulley or belt first.

 

Try belt dressing spray

 

A bird maybe...no but check to see if your belt is loose

 

I'm convinced a flock of Geese live under the hood of my Jeep.