Blocked bolts for the tailpipe hanger bracket. Plus, angle grinder update!!
CF Veteran
Joined: Nov 2011
Posts: 1,469
Likes: 0
From: State College, PA
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Seriously, just sit down and wrench on it for a few hours. You may get dirty and break a couple bolts, but it'll be fine. You'll feel accomplished knowing you fixed it yourself and save yourself some money
Thread Starter
Banned
Joined: Oct 2012
Posts: 1,744
Likes: 2
From: USA
Year: 1998
Model: Cherokee
Engine: 4.0L i6
Can't install new nutstrips if my bumper is permanently rusted in place!
Great directions!! But, they are wrong. I need a 3 hands 1) hold the brackets, and 2) spin the bolt, and 3) pinch the nut strip to stabilize it.
I am just afraid I will not be able to rethread that bolt, since it's got so much torque as I remove it. I don't want to have the XJ at the dealer for 2 weeks now that it's snow time. I will drive the winter with the coat hanger.
Great directions!! But, they are wrong. I need a 3 hands 1) hold the brackets, and 2) spin the bolt, and 3) pinch the nut strip to stabilize it.
I am just afraid I will not be able to rethread that bolt, since it's got so much torque as I remove it. I don't want to have the XJ at the dealer for 2 weeks now that it's snow time. I will drive the winter with the coat hanger.
I was afraid the bolt would not re-thread into a loose flopping nut strip.
Mechanic was able to swap out the bracket.
Thread
Thread Starter
Forum
Replies
Last Post
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 16, 2015 08:15 AM
94david
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 10, 2015 10:26 AM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 8, 2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
