Popping noise when I turn
#1
Member
Thread Starter
Join Date: Dec 2015
Location: MN
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
Popping noise when I turn
hey guys about a month ago I began hearing and feeling a popping and clicking noise in the drivers side floor area. I search for its source and I found that the right front ball joints where bad so I replaced those, I took it for a test drive and the clicking noise went away so now it is only a popping. I shook all the suspension parts and the only thing I found where bad sway bar links and bushings so I replaced those and the popping noise is still present. Do you guys have any idea what this could be or and leads on what part is going wrong? It sounds metal on metal. Any help is appreciated!
#4
Member
Thread Starter
Join Date: Dec 2015
Location: MN
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
I'll check that out thanks, My control arms are not stock ones they where replaced I think around 2 years ago before I bought it. Should I replace the bushings in hem just to be safe or is there a sure fire way on testing if your bushings are bad?
Last edited by Gunmetal Pearl XJ; 06-22-2016 at 05:39 PM.
#5
Member
Thread Starter
Join Date: Dec 2015
Location: MN
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
I replaced both ball joints because they were both worn, replaced sway bar bushings and links, checked my control arms, tie rods and trackbar bushings and those all seem to be in order. I'm still experiencing the popping noise when I turn right and now it seems to pop when I put it in reverse. Do any of you guys have any idea's on where to look next?
#7
Member
Thread Starter
Join Date: Dec 2015
Location: MN
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
Thanks for the help, I was looking over my front end again and checking the nuts over to make sure they are all tight. Should the drag link have any play in it? I can piviot the link on its rubber bushings, I'm guessing that it probably shouldn't be doing this.
Trending Topics
#8
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Make sure to put a wrench/socket on your track bar BRACKET to frame rail bolts and tighten the crap out of them.
#10
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
ElMartillo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
81
08-21-2016 05:37 AM
BigC9164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-07-2016 12:01 PM
dpetro1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
04-06-2016 11:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)