Nope haven't done this cause i don't know which driveshaft i can use then!

 

I am planning to use Reed Driveshaft but the dealer told me that i have to lift it first and then measure so he can sent me the right lenght....

 

Correct, you don't wanna by stuck with a ds you can't use

 

I'm installing my 3 inch lift today, and can't figure out what an extra piece that came with my rusty's shock is/where it goes. it is the metal cylinder in the picture.[IMG][/IMG]

If you have any idea what to do, let me know

 

Can't see the pic but im guessing bottom of the rear shock, inside the bushing. If i remember right they send two different sizes so you wont use them all.

 

[IMG][/IMG]

hopefully that picture will work. It seems like that cylinder wont fit inside the bushing along with the piece that will secure the shock down to the jeep.

 

It really depends. Rusty is hit and miss on stuff. Before u buy anything from his company call rusty and discuss it with him. Get on his good side. Rusty is sometimes stubborn and an *** toward some and a pretty cool Guy towards others. Get on his good side before u purchase his products. That way he will be more inclined to help u if they send the wrong parts or the parts never arrive.

 

Can't see the pic but im guessing bottom of the rear shock, inside the bushing. If i remember right they send two different sizes so you wont use them all.

Ok, now i see it. That's the front shock you prob won't use that bushing there.

 

i have seen many jeepers using a rear driveshaft similar with the front is this correct or is it a custom driveshaft?

 

If you use a SYE you can use a stock front ds or an aftermarket one

 

im looking for 33x10.50r15 for under $700.00 Any Ideas. I found some at Costco for $681.00 after tax but need a membership.. Thanks for the help guys

 

http://www.vulcantire.com/

Or CL

 

What were the ones at Costco?

 

I'm looking to do a 3" lift (think I've finally settled on the Zone lift with full leafs), 30 or 31" tires (I'm all for recommendations). What size tires would be recommended, and what rim width/backspacing should I be shopping for?

Also if anyone knows what I should do to recalibrate the speedometer? I have an AX15 transmission, for what it's worth.

 

New to me 01 xj my buds are telling me to get the RC 4.5 kit . Any thoughts?