LACK's 94 Country
#631
CF Veteran
Thread Starter
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
Spent a solid 1.5-2hrs in the garage after work today.
Got the axles in, hubs on, shocks in, track bar set, pinion angle/caster set, everything greased/torqued and filled the front diff.
Only things left on the front end is get the alignment close, torque the steering and bolt on the brakes.
In the rear all I have left is to move my shackles back one hole, torque everything, adjust the e-brake and bleed the brakes.
Getting close!!! Also waiting on the side tie in brackets for my 3-link crossmemeber. Don't want to take it out or drive it without those installed.
Couple quick pics. Wound up setting the arms to get about an inch of stretch in the front over stock. Should help the approach angle and make things a little more stable with the slightly longer wheelbase.
Got the axles in, hubs on, shocks in, track bar set, pinion angle/caster set, everything greased/torqued and filled the front diff.
Only things left on the front end is get the alignment close, torque the steering and bolt on the brakes.
In the rear all I have left is to move my shackles back one hole, torque everything, adjust the e-brake and bleed the brakes.
Getting close!!! Also waiting on the side tie in brackets for my 3-link crossmemeber. Don't want to take it out or drive it without those installed.
Couple quick pics. Wound up setting the arms to get about an inch of stretch in the front over stock. Should help the approach angle and make things a little more stable with the slightly longer wheelbase.
#633
Senior Member
Join Date: Apr 2016
Location: Maple Heights, Ohio
Posts: 536
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
That wheel placement looks great. An inch forward was a nice move. And everything looks so shiny and new! I'm dismantling most of my front end, maybe I should refinish everything? Wire brush and paint the knuckles?
(I'll go back and find the post in your thread. Then update this comment.)
Found it, Post 165: "Got the knuckles drilled out to 5/8 for the heim steering, then super clean & wire wheel to get them nice n clean. Primed them with some self etching primer and painted. They look purdy now."
https://www.cherokeeforum.com/f46/la...1/#post3343901
(I'll go back and find the post in your thread. Then update this comment.)
Found it, Post 165: "Got the knuckles drilled out to 5/8 for the heim steering, then super clean & wire wheel to get them nice n clean. Primed them with some self etching primer and painted. They look purdy now."
https://www.cherokeeforum.com/f46/la...1/#post3343901
Last edited by MWMahoneyJr; 04-25-2017 at 08:26 AM. Reason: Added additional awesomeness.
#634
CF Veteran
Thread Starter
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
That wheel placement looks great. An inch forward was a nice move. And everything looks so shiny and new! I'm dismantling most of my front end, maybe I should refinish everything? Wire brush and paint the knuckles?
(I'll go back and find the post in your thread. Then update this comment.)
Found it, Post 165: "Got the knuckles drilled out to 5/8 for the heim steering, then super clean & wire wheel to get them nice n clean. Primed them with some self etching primer and painted. They look purdy now."
https://www.cherokeeforum.com/f46/la...1/#post3343901
(I'll go back and find the post in your thread. Then update this comment.)
Found it, Post 165: "Got the knuckles drilled out to 5/8 for the heim steering, then super clean & wire wheel to get them nice n clean. Primed them with some self etching primer and painted. They look purdy now."
https://www.cherokeeforum.com/f46/la...1/#post3343901
Doesn't take very long, not sure how well it will hold up but it makes everything look a lot cleaner. Only thing I didnt clean up or replace are hubs or axle shafts.
#636
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
I promise I'm not being lazy... I went back 20 pages but still couldn't find what size coils and shocks you're running, but I'm sure I've seen it somewhere before....
#638
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by LACK
RE 5.5 coils and 12" travel bilstein 5100's
#639
CF Veteran
Thread Starter
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
Still haven't received the tie in brackets for the crossmember. Tuesday will be 2 weeks since I received the arms and everything, talked to Dave @ cavfab on wednesday the 19th and he said he would send them out.
Last edited by LACK; 04-30-2017 at 08:20 PM.
#640
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by LACK
Still haven't received the tie in brackets for the crossmember. Tuesday will be 2 weeks since I received the arms and everything, sent talked to Dave @ cavfab on wednesday the 19th and he said he would send them out.
#641
CF Veteran
Man, really hope this doesn't continue to be the standard with Donovan and Dave. I know they're slammed, and trying to work out some issues with the new shop, but I really thought they would have gotten everything back on track at this point.
#643
CF Veteran
Thread Starter
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
You got your shipping confirmation right?? Should be any day now hopefully.
Dave has been good in responding to my e-mails, which Im sure just adds to the list of things for them to do. Its just been a long, long wait.
I can get them this evening when i get home from work.
I can get them this evening when i get home from work.
#645
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by LACK
You got your shipping confirmation right?? Should be any day now hopefully.Dave has been good in responding to my e-mails, which Im sure just adds to the list of things for them to do. Its just been a long, long wait.I can get them this evening when i get home from work.