Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Old Sep 21, 2015, 03:49 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: General Overview
Print Wikipost

XJ Ask the Question Thread

Thread Tools
 
Search this Thread
 
Old Dec 18, 2011 | 10:59 AM
Share
  #8611  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
EDIT: Sorry, I read the post wrong.
Last edited by NewKindOfClown; Dec 18, 2011 at 12:05 PM.
Old Dec 18, 2011 | 12:03 PM
Share
  #8612  
Bohnett's Avatar
Bohnett
Seasoned Member
 
Joined: Aug 2010
Posts: 390
Likes: 0
From: Ashburn, VA
Year: 2000
Model: Cherokee
Engine: 4.0
Default
Originally Posted by 95Cherokeedude
I have a 95 cherokee with a NP-231 T-case and a 3 inch RC lift. I replaced the rear output seal 3 times, replaced extension housing, got an new ceramic coated slip yoke and the damn thing is leaking again. The lift never came with axle shims and i wonder if this is the problem?? I was also contemplating a T-case drop and maybe the the axle shims as an SYE alternative.. I seem to be the only guy with the seal leaking issue??? As for vibes they don't bother me. I just want to stop leaving oil all over the adirondacks!!! Anyone else out there in the same boat?? what do I do??
Ok, let's start by looking at the angle of your driveshaft. With the RC 3 in lift your angle is probably off unless you have the TC drop on. Also, I would save up to go with the SYE. If your angle is off you can get 2 or 4 degree shims to help until the SYE. As far as the leak goes coming from your rest yoke? I presume? I've attached a picture for you to see if your yoke looks like this, it could cause leaks if you have that groove even replacing the seal. Well hope something I've said helps.


XJ Ask the Question Thread-image-9721930.jpg
Old Dec 18, 2011 | 02:46 PM
Share
  #8613  
bsmith97xj's Avatar
bsmith97xj
Member
 
Joined: Jul 2011
Posts: 185
Likes: 0
From: Hutchinson Ks
Year: 1997
Model: Cherokee
Engine: 4.0
Default
Can I just drill new holes for rear upper shackle to correct the poor angle?
Old Dec 18, 2011 | 03:28 PM
Share
  #8614  
odgreen's Avatar
odgreen
CF Veteran
 
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Default
Originally Posted by bsmith97xj
Can I just drill new holes for rear upper shackle to correct the poor angle?
Negative ghost rider.
Old Dec 18, 2011 | 09:38 PM
Share
  #8615  
bsmith97xj's Avatar
bsmith97xj
Member
 
Joined: Jul 2011
Posts: 185
Likes: 0
From: Hutchinson Ks
Year: 1997
Model: Cherokee
Engine: 4.0
Default
Originally Posted by odgreen89on35s

Negative ghost rider.
Dang. Looked like it might have been able to work.
Old Dec 19, 2011 | 06:11 PM
Share
  #8616  
austm31's Avatar
austm31
Newbie
 
Joined: Jun 2009
Posts: 5
Likes: 0
From: LI, New York
Year: 2001
Model: Cherokee
Default
Hey I have an 01 Cherokee with about 179,000 on it, the turn signals stopped flashing but go on, same with hazards replaced bulbs, didn't fix it, and can turn signal on with key off no power, can this be a short in multifuncion switch?
Old Dec 19, 2011 | 07:49 PM
Share
  #8617  
Disoriented Hillbilly's Avatar
Disoriented Hillbilly
CF Veteran
 
Joined: Nov 2010
Posts: 2,139
Likes: 1
From: chillicothe, OH
Year: 1991
Model: Cherokee
Engine: 4.0
Default
91 xj with 3" rc lift lookin for new uca's. Dont need to be adjustable. Any suggestions???
Old Dec 19, 2011 | 08:04 PM
Share
  #8618  
logstomper's Avatar
logstomper
Junior Member
 
Joined: Nov 2011
Posts: 44
Likes: 0
From: the up eh!
Year: 89' 92'
Model: Cherokee
Engine: 4.0
Default coil bucket measurements.
anyone know off hand or that could measure center to center for me on the coil buckets. again my jeep is 4/5 hours away. thanks.
Old Dec 19, 2011 | 09:10 PM
Share
  #8619  
ufgatorfan97's Avatar
ufgatorfan97
Newbie
 
Joined: Jul 2011
Posts: 6
Likes: 0
From: Jax, FL
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
Default EGR Valve
Hi there. Noob question, but I have a 2001 WJ whose engine just blew. In ordering another, the question has come up whther i have an EGR valve or not. I've searched EGR, ERG Valve, etc, the forum indicates that "The following words are either very common, too long, or too short and were not included in your search: EGR". So I'm having some trouble locating an image or spec or anything that would help me locate the EGR valve on my WJ. I can't even find a decent google image of what or where the EGR would be. HALP! And thanks in advance.
Old Dec 20, 2011 | 12:28 PM
Share
  #8620  
Fsher21's Avatar
Fsher21
Senior Member
 
Joined: May 2010
Posts: 882
Likes: 1
From: MI 48642
Year: 1996
Model: Cherokee
Engine: 4.0
Default
Originally Posted by ufgatorfan97
Hi there. Noob question, but I have a 2001 WJ whose engine just blew. In ordering another, the question has come up whther i have an EGR valve or not. I've searched EGR, ERG Valve, etc, the forum indicates that "The following words are either very common, too long, or too short and were not included in your search: EGR". So I'm having some trouble locating an image or spec or anything that would help me locate the EGR valve on my WJ. I can't even find a decent google image of what or where the EGR would be. HALP! And thanks in advance.
Google was a bit more friendly for me. It is the exhaust gas re circulation valve. Here is the first link I clicked.
Old Dec 20, 2011 | 02:54 PM
Share
  #8621  
Jeepyjeepy's Avatar
Jeepyjeepy
Seasoned Member
 
Joined: Jun 2011
Posts: 419
Likes: 0
From: Wichita
Year: 1987
Model: Cherokee
Engine: 4.0
Default
Id go to ur local dealership. They look up diagrams and stuff for me. Should be able to actual take ur vin in and ask them to look up wether it has one or not
Old Dec 20, 2011 | 02:55 PM
Share
  #8622  
Jeepyjeepy's Avatar
Jeepyjeepy
Seasoned Member
 
Joined: Jun 2011
Posts: 419
Likes: 0
From: Wichita
Year: 1987
Model: Cherokee
Engine: 4.0
Default
Curiosity makes me wonder. I cleaned my iac today but how does something so far from the combustion chamber get carbon deposits on it
Old Dec 20, 2011 | 03:33 PM
Share
  #8623  
Disoriented Hillbilly's Avatar
Disoriented Hillbilly
CF Veteran
 
Joined: Nov 2010
Posts: 2,139
Likes: 1
From: chillicothe, OH
Year: 1991
Model: Cherokee
Engine: 4.0
Default
Bump.
91 xj with 3" rc lift lookin for new uca's. Dont need to be adjustable. Any suggestions???

Should i just replace w new stock ones or????
Old Dec 20, 2011 | 09:12 PM
Share
  #8624  
sycoglitch's Avatar
sycoglitch
CF Veteran
 
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Default
Has anyone used plasti dip. So i need to sand down first like with paint or can I go right over it with several coats. And how is plasti dip with mud and snow and stuff
Old Dec 20, 2011 | 09:33 PM
Share
  #8625  
onlyinajeep726's Avatar
onlyinajeep726
CF Veteran
 
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Default
Originally Posted by austm31
Hey I have an 01 Cherokee with about 179,000 on it, the turn signals stopped flashing but go on, same with hazards replaced bulbs, didn't fix it, and can turn signal on with key off no power, can this be a short in multifuncion switch?
I'd try replacing the flasher relay first, then move to multifunction stick.



Advanced Search

All times are GMT -5. The time now is 09:13 PM.