huh? mine takes 19.7.... when I am close to having to push my jeep to the pump

 

I think I had to be coasting into the gas station on fumes I got 20.1 gal once took a pic.

 

i have been leaking atf out of the fitting between the tranny line and the tranny (top front one.) I replaced the rubber o ring and the plastic clip that goes into the fitting but it still leaks. any insight would be appreciated before she gets jb welded

 

is there something obstructing it from making a tight seal?
it could be coming from just around the fitting and not the fitting itself

 

no i thoroughly cleaned it before putting it back together and the fluid leaks right out the fitting and drips down the tranny line since it comes out at a downward angle to clear the oil pan. I'd like to do something more permanent than jb weld since I'm gonna drop the cross-member so i can easily get to it but it is my dd'er and cant be down longer than today

 

what lug pattern is a 1988 cherokee?

 

My 95 sport in line 6 keeps over heating. Have changed out sensors and relay switches. water pump. still runs hot. the fan will not come on.. yes fan is good .. Fan will come on when the ac is on ... what is next.. how do i fix this.. any ideas

 

5x4.5" from '84-'01

 

check radiator, t-stat, coolant level and rad cap
fan not kicking on sounds like a wiring issue
what do you mean runs hot? how hot?

 

is that also the same as 5x114.3?

 

yes it is

 

thanks dude. i feel like such a newbie. i don't know how to remove my front bumper.

 

chop saw?
there are 3 bolts (4 if you have tow hooks or just the mounts for them)
that you can see if you remove the end caps or pull on the plastic fender lining a little, I only did this once and I only really helped was kind of a PIA

 

Hey guys got a question. My jeep is grinding in the back. I've been playing in water recently, after that I started hearing grinding in the back. So I had my outer bearings and seals replaced. I still hear grinding. What do you guys think it is?

 

pinion bearing?
my buddys d44 was grinding and he just had the whole thing redone
have you checked the brakes out?