years?

usually swapping columns between years isn't possible if they are too far apart. Need more information to say.

 

hey guys,
What is the pushrod length for 2001 Jeep cherokee 4.0L?
thanks

 

FSM says 9.500 to 9.520 in.

 

hi. i my jeeps ecm is busted. the part no. is P56041 252 but i cant find one on the net. only ones with a different last three digits. if i get an ecm that says 56041 251 thats also for a 4.0 litre unleaded automatic like mine, is there any reason why the 251 wont work? also mine is r/h drive because i live in Nmabia Africa. will a l/h drives ecm be the same? i need this help urgently because the ebay sale is closing soon.

 

i meant Namibia Africa.

 

Those part #s are close enough that I'm pretty confident it will work as long as the engine/transmission/fuel/year are the same. LHD and RHD ecm is the same.

 

Will a rear axle off a (97 )or newer Dakota be a straight bolt on for an xj?

 

no

i don't think the dodge 8.25 has the same gear divisions, so that will be a major issue

also different bolt pattern and wider

 

if you can do ssome weldings get a ford 8.8 axle from a 96+ explorer. Will get you 4.10 gears. Limit slip diff, disc brakees. There is some work in the conversion but i hear its worth it. Also depends if you could get your hands on one

 

Hey guys, putting a new wheel bearing in my 00 XJ today and I was wondering what size the axle nut is? Not the thread size and pitch, just the size socket i'll need.

 

mmm fun stuff. I advise an impact wrench or a big breaker bar.

36mm is the socket size.

 

Thanks man, yea I have all tools needed. Shouln't be too bad.

 

36 I think

 

too slow grasshopper

 

so will all the 56041---'s work?