When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go hereXJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
he publicly dissed another vendor here on the forum and refused to apologize or take it back. That's a very very serious offense
Edit: This isn't the place, and I'm not the person to provide details. Suffice to say, that wasn't his first issue with our staff. He was banned because that was the last straw.
I'm gonna be removing my tranny to put another one in. Should I go ahead and replace my freeze plugs while I got the tranny off? My jeep has basically no rust and from the looks of the other freeze plugs, I don't think they are gonna go bad. Hat do you guys think? Thanks
I'm gonna be removing my tranny to put another one in. Should I go ahead and replace my freeze plugs while I got the tranny off? My jeep has basically no rust and from the looks of the other freeze plugs, I don't think they are gonna go bad. Hat do you guys think? Thanks
Yes, yes, and yes! Why the hell not? The rear one at the top forced an engine pull for me about a year ago. Go brass now!
I'm gonna be removing my tranny to put another one in. Should I go ahead and replace my freeze plugs while I got the tranny off? My jeep has basically no rust and from the looks of the other freeze plugs, I don't think they are gonna go bad. Hat do you guys think? Thanks
YES, and try to clean all the junk out of the whole, flushing would be nice, and GO BRASS!!!!
Anybody got one of these transmission plate cover things? My tranny doesn't have one and I want to put one on when I go to take it out. I would go to the junkyard but it's an hour away and I'd have to pull a tranny out to get one off. Anybody have one I could buy from them? I just need the larger top half. Thanks.
Anybody got one of these transmission plate cover things? My tranny doesn't have one and I want to put one on when I go to take it out. I would go to the junkyard but it's an hour away and I'd have to pull a tranny out to get one off. Anybody have one I could buy from them? I just need the larger top half. Thanks.
The previous owner of my '99 XJ installed metal caps on the tire valve stems. I went to check tire pressure today and none of them would budge! Tried gripping the cap and stem with pliers but they would not move. (I did not get too aggressive though, didn't want to wind up with 4 flat tires in the dead of winter!)
Heat is probably not going to be the ticket given there are rubber parts involved. Any ideas how to get these off without destroying the valve stems?
The previous owner of my '99 XJ installed metal caps on the tire valve stems. I went to check tire pressure today and none of them would budge! Tried gripping the cap and stem with pliers but they would not move. (I did not get too aggressive though, didn't want to wind up with 4 flat tires in the dead of winter!)
Heat is probably not going to be the ticket given there are rubber parts involved. Any ideas how to get these off without destroying the valve stems?
Try some penetrating oil, if nothing you'll have to get new stems. I work at Discount Tire and those are a PITA.
Sep 21, 2015, 03:49 PM
Ask the Question Thread
