Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Joined: Apr 2014
Posts: 1,028
Likes: 0
From: Hagerstown MD
Year: 93
Model: Cherokee
Engine: 4.0 I6 w/Flux Capacitor
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
My SYE started to leak today at the rear splines, not the seal, but at the yoke and driveshaft. Does the rubber star washer act as a washer or does it actually seal anything?
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
2 spot 2 flood. I am afraid of the dark. hahaha. 4 in front, 2 on bumper, 1 on each side, and reverse lights is the eventual plan. All on separate circuits of course! Im thinking very small 2'' by 2'' on the sides with nightshade for hidden appearance. Don't want overkill on the side just enough to light what i wanna take a picture of. Cant hold a Mag-light and a camera at the same time
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Member
Joined: Jun 2012
Posts: 138
Likes: 0
From: Central Frontenac, ON Canada
Year: 2001
Model: Cherokee
Engine: 4.0
What reads ABS codes on a 2001 XJ?
I guess my question is also will a ODBII reader read ABS codes from an 01?
Wife drove it and now ABS light is on, brakes work fine and I get no codes on my cheapie Audel reader.
Thanks in advance!
I guess my question is also will a ODBII reader read ABS codes from an 01?
Wife drove it and now ABS light is on, brakes work fine and I get no codes on my cheapie Audel reader.
Thanks in advance!
Junior Member
Joined: Feb 2014
Posts: 88
Likes: 1
From: Washington
Year: 1990
Model: Cherokee
Engine: 4.0
How do you get to the bolts to replace the CPS?
Other than hiring a midget contortionist with long slender arms?
I can see it, I can touch it, but I can't seem to get a socket or a wrench on the bolts...
Other than hiring a midget contortionist with long slender arms?
I can see it, I can touch it, but I can't seem to get a socket or a wrench on the bolts...
Last edited by GreatPumpkin; Jun 1, 2014 at 11:09 PM. Reason: Speeling and gramma
CF Veteran
Joined: Aug 2011
Posts: 1,994
Likes: 8
From: San Jose
Year: 89
Model: Cherokee
Engine: 4.0 I6
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
If I had one I'd offer to pop up to the store but mine's the little AL439, OBD-II only.
No brake line leaks I hope? Reservoir full?
Member
Joined: Jun 2012
Posts: 138
Likes: 0
From: Central Frontenac, ON Canada
Year: 2001
Model: Cherokee
Engine: 4.0
Thanks for the suggestion, I wonder if Torque will read it using my bluetooth dongle, have to check it out!
Senior Member
Joined: Nov 2012
Posts: 521
Likes: 0
From: Oregon
Year: 1996
Model: Cherokee
Engine: 4.0
Can anyone tell me with a Ford 8.8, to get to match up with a cherokee front drive shaft ujoint(1310), do I just need a 1310 adapter? Im confused because my 8.8 doesnt seem to have a yoke or anything. Right off the back is the large round thing with holes for what I thought the yoke connected to, or does the adapter bolt right on to that? Thanks for any help.
