Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
And then you reinstall your axle shafts? lol I used these two writeups http://www.go.jeep-xj.info/HowtoD30AxlesSeals.htm http://www.stu-offroad.com/axle/d30seals/seal-1.htm
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Doesn't matter. Federal law. Everyone leave it alone. No reason to start an argument.
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
I tried it on my low buck stroker I did on my race XJ. I couldn't get the air fuel mixture right. I had an adjustable fuel pressure regulator and still couldn't get it where I wanted. So I gave up on it to qwik cause I had to race. If I would've stuck with it I'm sure it would've been a big difference. If you do that you may need to run a fuel cell with an inline adjustable fuel pump instead of the stock set up or maybe an adjustable map would help. Idk. Let me know what you come up with please.
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
Member
Joined: Jun 2011
Posts: 154
Likes: 0
From: Des Moines, IA
Year: 1998
Model: Cherokee
Engine: 4.0L
I tried it on my low buck stroker I did on my race XJ. I couldn't get the air fuel mixture right. I had an adjustable fuel pressure regulator and still couldn't get it where I wanted. So I gave up on it to qwik cause I had to race. If I would've stuck with it I'm sure it would've been a big difference. If you do that you may need to run a fuel cell with an inline adjustable fuel pump instead of the stock set up or maybe an adjustable map would help. Idk. Let me know what you come up with please.
I guess that kinda brings up another question. Would modifying the block and heads to run high amounts of boost (20ish psi) be more cost effective and efficient than stroker/trubo combo?
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Ok. My buds got a 95 XJ with the 44 and 2.5" mandrel. Plus his cats are cut off. Hold on before y'all attack him on cutting his cats off. We live in Tennessee and have no emissions test here plus he trailers his to trails it's not street legal. It's loud with out a cat and a 44.
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
The only thing I'm worried about is the drive train. I've heard that the aw4 is only good for 400 hp but what about the rest of it. I know it would probably be more cost effective to do a V8 swap but I love the torque of the inline 6 and my other car has a turbo and I think that is the most badass sound in the world.
I guess that kinda brings up another question. Would modifying the block and heads to run high amounts of boost (20ish psi) be more cost effective and efficient than stroker/trubo combo?
Senior Member
Joined: Apr 2012
Posts: 638
Likes: 0
From: Huntsville, Tn
Year: Different Years (I have several XJ's)
Model: Cherokee
Engine: 4.0 HO
Senior Member
Joined: Apr 2013
Posts: 673
Likes: 1
From: Sin City
Year: 1998
Model: Cherokee
Question. I'm doing a durango box install since my stock gear box went bad. Do the lines bolt into the same place and location on the durango box as they do on the Xj one?
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
But if you're talking about the power steering fluid lines then yes they bolt to basically the same locations.
Junior Member
Joined: Jan 2014
Posts: 81
Likes: 0
From: Chattanooga, TN
Year: 2000
Model: Cherokee
Engine: 4.0
Extremely rough idle, no gas, and sputtering at startup. No check engine light. Oil pressure is normal. Temp is ~170.
This has happened only twice since December, at random.
Any ideas???
Thanks
This has happened only twice since December, at random.
Any ideas???
Thanks
