Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
UCAs are M10x1.5 75MM, same as track bar to axle.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Member
Joined: Aug 2013
Posts: 145
Likes: 0
From: Long Island
Year: 2000
Model: Cherokee
Engine: 4.0
would i be able to put door handles from the front doors of a 2000 4 door xj onto my 2000 2 door xj? mine were painted over and i found a set for sale but they are from a 4 door so i just wasnt sure if they will fit
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
The handles themselves should be the same, but I think the linkages inside the doors are different. Doesn't sound like a problem for your application.
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Yep. Cut the bastards with a Dremel and replace them. Loosely spinning bolts indicate that someone already tackled the OE bolts some time in the past.
https://www.cherokeeforum.com/f51/br...-guide-150384/
https://www.cherokeeforum.com/f51/br...-guide-150384/
Seasoned Member
Joined: Jun 2012
Posts: 261
Likes: 0
From: Hartland Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Yep. Cut the bastards with a Dremel and replace them. Loosely spinning bolts indicate that someone already tackled the OE bolts some time in the past. https://www.cherokeeforum.com/f51/br...-guide-150384/
Newbie
Joined: Feb 2012
Posts: 26
Likes: 0
From: UK
Year: 1999
Model: Cherokee
Engine: 4.0L I-6
Okay I have a question.... I own a 2000 jeep cherokee limited 4.0L. I'm having misfire issues. I would go on a short trip but long enough to warm up the engine. When I shut off the engine and go to restart it after a few minute cool down I go to restart it idle really rough and I shot me a CEL of p300 and p301-304. I' replaced spark plugs and see how the fuel injectors look tomorrow. I looked around and couldn't find anything on the internet saying the same codes mine gave me. Any help would help?
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Okay I have a question.... I own a 2000 jeep cherokee limited 4.0L. I'm having misfire issues. I would go on a short trip but long enough to warm up the engine. When I shut off the engine and go to restart it after a few minute cool down I go to restart it idle really rough and I shot me a CEL of p300 and p301-304. I' replaced spark plugs and see how the fuel injectors look tomorrow. I looked around and couldn't find anything on the internet saying the same codes mine gave me. Any help would help?
