Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I got a bunch 0f 3/16 plate sitting around and i want to build a new front winch bumper
Question is can i build the whole thing out of 3/16 or will i need thicker steal for the mounts to the unibody?
Ive always used 3/8 for the frame mount but i here some guys are using 3/16 or 1/4 plate
Whats your opinions ?
Question is can i build the whole thing out of 3/16 or will i need thicker steal for the mounts to the unibody?
Ive always used 3/8 for the frame mount but i here some guys are using 3/16 or 1/4 plate
Whats your opinions ?
CF Veteran
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
So my PO decided to break my transmission pan bolt so I have to get a new pan.
Will this pan work for my 98 with the AW4?
http://www.jcwhitney.com/original-ca...3y1998g110u0j4
Will this pan work for my 98 with the AW4?
http://www.jcwhitney.com/original-ca...3y1998g110u0j4
Senior Member
Joined: Nov 2012
Posts: 521
Likes: 0
From: Oregon
Year: 1996
Model: Cherokee
Engine: 4.0
So my PO decided to break my transmission pan bolt so I have to get a new pan.
Will this pan work for my 98 with the AW4?
http://www.jcwhitney.com/original-ca...3y1998g110u0j4
Will this pan work for my 98 with the AW4?
http://www.jcwhitney.com/original-ca...3y1998g110u0j4
Oh and on my topic, you guys said i need to check the vaccuum line that goes to the throttle body and the map sensor? Or somewhere around there. Ill take a look.
Last edited by Eagle564; May 17, 2013 at 05:40 PM.
Junior Member
Joined: Jul 2011
Posts: 47
Likes: 1
Year: 1999
Model: Cherokee
Engine: 4.0 i6
hey so i my fog lights were broken and the switch was melted down. i replaced all of those and i turned the fog lights on they worked for about 5 seconds and then shut off. well all of my dashboard lights turned off with the fogs lights >=(. does anyone have a proper fog light switch wire diagram? im almost pretty sure i simply wired the 12v to the dashboard lights instead of the fog lights....woops. thanks
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Newbie
Joined: May 2013
Posts: 1
Likes: 0
Model: Cherokee
97 xj passenger windows don't work
97 xj with driver side window working
But passenger front side not working. Seems the passenger side rear
Occasionally does work from driver side.
My thought is if the locks are working then
I must be getting power to the passenger controls.
Ques. Do drive side controls link to the passenger
Side controls? There doesn't seem to be
Power coming to the tan wire on the passenger
Control which I think runs to cb#26.
How would you further diagnose to eliminate
The driver side control?
But passenger front side not working. Seems the passenger side rear
Occasionally does work from driver side.
My thought is if the locks are working then
I must be getting power to the passenger controls.
Ques. Do drive side controls link to the passenger
Side controls? There doesn't seem to be
Power coming to the tan wire on the passenger
Control which I think runs to cb#26.
How would you further diagnose to eliminate
The driver side control?