CF Veteran
Quote:
Ok great thank you and im gonna stay away from the speaker bar haha
Well if its the one from the pre97 I think it should fit no problem...Originally Posted by grat134
Ok great thank you and im gonna stay away from the speaker bar haha
Member
Quote:
Except for not having speakers.
I thought about trying it, but was concerned about wasting the $ if it did not work out right. The tunes would be better with the speaker location.Originally Posted by DieselD
I mentioned it. Lol. I got the actial headliner in no probs, but the speaker bar (the actual plastic that holds the speakers up) was a no go. But it doesn't look bad at all.Except for not having speakers.
CF Veteran
Quote:
I thought about trying it, but was concerned about wasting the $ if it did not work out right. The tunes would be better with the speaker location.
I wasted money. Originally Posted by Nasty
I thought about trying it, but was concerned about wasting the $ if it did not work out right. The tunes would be better with the speaker location.
You could probably make it work by cutting some little slits for the tabs of the plastic part to slip into.
Its been like 2 yrs since I had tried to make it work. I had lost my paitenece with it. Was like 90+ degrees out. Sweating my *** off replacing my saggy *** headliner.
So it might be easier than I thought lol.
Member
Quote:
You could probably make it work by cutting some little slits for the tabs of the plastic part to slip into.
Its been like 2 yrs since I had tried to make it work. I had lost my paitenece with it. Was like 90+ degrees out. Sweating my *** off replacing my saggy *** headliner.
So it might be easier than I thought lol.
Can you post some pictures. I think I may try it for speakers at the rear. You never know until you try. I guess you got your bar in so with a little forceful persuasion and caulk or something maybe. Just maybe.Originally Posted by DieselD
I wasted money. You could probably make it work by cutting some little slits for the tabs of the plastic part to slip into.
Its been like 2 yrs since I had tried to make it work. I had lost my paitenece with it. Was like 90+ degrees out. Sweating my *** off replacing my saggy *** headliner.
So it might be easier than I thought lol.
CF Veteran
Quote:
Sorry don't have any, and my 91 resides at my dads house. Plus (no offense) but I'm not dropping the headliner to take pics. Lol that'd be a PITA. Originally Posted by Nasty
Can you post some pictures. I think I may try it for speakers at the rear. You never know until you try. I guess you got your bar in so with a little forceful persuasion and caulk or something maybe. Just maybe.
IIRC there were spots to put it, but they were too far back, didn't line up with the speaker holes in the headliner.
If you really want a speaker bar, there ARE ones for pre97 that I THINK are "bolt-in" definitely would be easier.
CF Veteran
What does iirc mean?@
CF Veteran
I see. I ****ing hate being old
CF Veteran
Took me awhile to figure it out...
I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
CF Veteran
Quote:
I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
I have googled quite a few abbreviations. Shhhhh dont tell nobodyOriginally Posted by DieselD
Took me awhile to figure it out...I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
CF Veteran
Quote:
I have googled quite a few abbreviations. Shhhhh dont tell nobody
Belongs in the DJM thread...Originally Posted by I Leak Oil
I have googled quite a few abbreviations. Shhhhh dont tell nobody
(That's "Don't Judge Me") lol
CF Veteran
Quote:
Belongs in the DJM thread...
(That's "Don't Judge Me") lol
Ive seen that junk onceOriginally Posted by DieselD
Belongs in the DJM thread...
(That's "Don't Judge Me") lol
Member
Quote:
Thanks,Originally Posted by I Leak Oil
Windows. And trim
interchange on the XJ parts is another thing that makes these
XJs so great...
Member
Quote:
I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
"Foreign language",,,,you got that right.Originally Posted by DieselD
Took me awhile to figure it out... I know how you feel, it's like reading a foreign language if you don't know all the internet terms.
When I first joined a forum (futureproducers, its for music) I didn't know **** and was lost in translation a lot...
My wife is Chinese, when I first got on this site, was like when I first met
my wife........."Somebody help me,,,please"
CF Veteran
I have to go buy some new heater hose because I accidentally ripped one installing a new t-stat housing. I remember someone saying the inlet and outlet hoses were different sizes.
So my question is. What size is that outlet heater hose or dose it really matter?
So my question is. What size is that outlet heater hose or dose it really matter?