Oh, no, it's not holding. The weld broke, so the actual mount part moves back and forth. I went to the drive-in with like 20-30 people from my school and after an hour drive there I remembered the shock was broken. And since the weld broke I'm assuming the cancer will have to be cut out and then have a new piece of metal and mount welded in. The lift gate sure is heavy by the way... and replacing tail-lights/cleaning the cargo area with nothing but a broomstick holding it up is terrifying.

 

I've got the 4.7 dakota tee to cut into the top radiator hose. Can anybody tell me what overflow tank they used. I've got a later model xj tank but it's a little too tall.Mines an 88 Thanks

 

I pulled one out of some import crossover/SUV when I did open cooling.

 

Thanks ,I've been trying to stay away from pullapart I never get any thing done , always in search of that next great find.Anyway I'll have to go find one. Thanks again

 

Is this an ok place to hang my amp? It will not fit under the rear seat and I do not want to hang it on the back of the seat. I checked behind the panel and it seems like it will work.



I grinded where the tire holder was off.

 

Behind panel.

 

That's where mine is.

 

Yeah but people can break the window and run off with it it real easy there

 

Thinking about somehow attaching a metal cable there and bolting it to the frame. That would either slow them down a lot or they would just give up an take off.

 

Sweet

 

Bolt it down with hex head self tapers. Most thief's don't carry a 5/16th socket.

 

I have 7/16th so good point

 

What temp T-stat should I go with?

 

Get a 195 t stat from the stealership

 

You can get the pipe at advance auto parts for ten bucks, some say to get t stats from the dealership, I don't know that's probably the safest bet, either way get a 195.