Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Starting Hesitation

Old Jun 3, 2023 | 02:21 PM
  #1  
2DrXJRegulatorFix's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2020
Posts: 77
Likes: 12
From: New York
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default Starting Hesitation

2000 XJ 5 speed has a starting hesitation. Once it starts, it runs totally fine. Sometimes it'll take a few cranks to get it started. It seems to be slightly better if I leave the key on on position for a few moments before cranking. And it's better if it's been recently started. Recently changed all the spark plugs and gapped to .035, the fuel pump can be heard priming before cranking, and it will start up on clutch dump. Where should I check first?
Reply
Old Jun 3, 2023 | 05:59 PM
  #2  
Jim Malcolm's Avatar
Senior Member
 
Joined: Oct 2020
Posts: 934
Likes: 282
From: PA
Year: 1994
Model: Cherokee (XJ)
Engine: 4.0
Default

https://www.cherokeeforum.com/f2/200...57/#post670371
Reply
Old Jun 3, 2023 | 06:23 PM
  #3  
mgray9119's Avatar
Newbie
 
Joined: May 2023
Posts: 11
Likes: 3
Default

Originally Posted by 2DrXJRegulatorFix
2000 XJ 5 speed has a starting hesitation. Once it starts, it runs totally fine. Sometimes it'll take a few cranks to get it started. It seems to be slightly better if I leave the key on on position for a few moments before cranking. And it's better if it's been recently started. Recently changed all the spark plugs and gapped to .035, the fuel pump can be heard priming before cranking, and it will start up on clutch dump. Where should I check first?
It could be the valve in the fuel pump is bad. This means the fuel does not stay in the line. That is why it works when you leave the key on or you have recently driven it. Fuel pump is expensive repair if it is located in the fuel tank. I have the same issue in my 1998 and I just live with it as the pump is working, just a bad valve.
Reply
Old Jun 3, 2023 | 10:13 PM
  #4  
2DrXJRegulatorFix's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2020
Posts: 77
Likes: 12
From: New York
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

Did you read what was posted?

Originally Posted by mgray9119
It could be the valve in the fuel pump is bad. This means the fuel does not stay in the line. That is why it works when you leave the key on or you have recently driven it. Fuel pump is expensive repair if it is located in the fuel tank. I have the same issue in my 1998 and I just live with it as the pump is working, just a bad valve.
Is there a way to check the valve? Or is it just a whole fuel pump replacement?
Reply
Old Jun 3, 2023 | 10:43 PM
  #5  
mgray9119's Avatar
Newbie
 
Joined: May 2023
Posts: 11
Likes: 3
Default

Originally Posted by 2DrXJRegulatorFix
Did you read what was posted?



Is there a way to check the valve? Or is it just a whole fuel pump replacement?
It is all one unit (pump and valve) and it is in the fuel tank. You have to empty the fuel tank and pull it out. It is a big job. I notice the problem less now and it is intermittent. If it is bugging you, you could always prime it by turning the key (not all the way) and let the pump work before you hit ignition.
Reply
Old Jun 4, 2023 | 08:12 AM
  #6  
Jim Malcolm's Avatar
Senior Member
 
Joined: Oct 2020
Posts: 934
Likes: 282
From: PA
Year: 1994
Model: Cherokee (XJ)
Engine: 4.0
Default

.

Last edited by Jim Malcolm; Jun 4, 2023 at 08:15 AM.
Reply
Old Jun 4, 2023 | 09:46 AM
  #7  
Saudade's Avatar
CF Veteran
5 Year Member
Veteran: Air Force
Community Favorite
 
Joined: Aug 2020
Posts: 2,141
Likes: 582
From: SoCal
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Default

You can test the system with a fuel pressure gauge. Hook up the gauge. Fuel pressure should be about 49.2 PSI. If below 44 psi, check for kinks in the fuel lines.

You can try a leak down test but yours sounds normal. After warming up, with FP gauge still attached, shut down engine. Check valve should hold pressure. However fuel pressure can drop to zero once the engine cools.

Once cooled, with FP gauge attached, turn key to prime pump but do not start the engine. FP pressure should rise to spec (1-2 seconds).
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
xDARKWAVEx
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Oct 21, 2013 06:18 PM
vandelden21
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
Jul 7, 2013 09:13 PM
Jeepfreak1020
Modified XJ Cherokee Tech
5
Sep 24, 2012 08:27 PM
Chads97
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Nov 25, 2011 10:01 PM
4x4Jeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
Jun 24, 2011 04:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:06 AM.