Grounds and such
Thread Starter
Junior Member
Joined: May 2014
Posts: 53
Likes: 0
From: Fort Collins, CO
Year: 1987
Model: Wagoneer
Engine: AMC 242 I6 (4.0 L)
Please clarify, You do have the two piece RF axle with the Vacuum Disco? It's late and I ain't reading back through. People shared good info while I was at that here> https://www.cherokeeforum.com/f2/dan...-disco-172988/
If you use some stupid thing that doesn't let you see links, That's a thing we might want to know. ( IE, if you are on something "smart" you may not have assess to the info). It's just we go to adjust for, the "smart" interface.
If you use some stupid thing that doesn't let you see links, That's a thing we might want to know. ( IE, if you are on something "smart" you may not have assess to the info). It's just we go to adjust for, the "smart" interface.
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Well cool! Doing the seal in the disco really sucks. As far as the seal stuck in the diff....I think you can bash it out with a long pipe/bar from the outside. Do work it top/bottom, left right but I'm sure there is a lip you can hit with something.
Thread Starter
Junior Member
Joined: May 2014
Posts: 53
Likes: 0
From: Fort Collins, CO
Year: 1987
Model: Wagoneer
Engine: AMC 242 I6 (4.0 L)
Well here is the seal I pried out today with a pry bar.
I saw from Dflintstones axle post, that the carquest part #710069 is the same as the one I pulled out of my differential.
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Not filling out your info and making someone who is already donating there time need to search just to fine out what we are talking about is a bit of a peeve. Also it seems Ether links are not displayed, or there is some issue with opening them. (than the poster won't tell you his smart thing is stupid, you need to figure it out by what they don't know.) 
I about always keep my hands clean. Grease is better on a rag then on the tools and everywhere else!
Yea, the one on the left looks like the one that would have gone into a Disco.
I about always keep my hands clean. Grease is better on a rag then on the tools and everywhere else!
Yea, the one on the left looks like the one that would have gone into a Disco.
Last edited by DFlintstone; Jun 15, 2014 at 06:03 PM.
Thread Starter
Junior Member
Joined: May 2014
Posts: 53
Likes: 0
From: Fort Collins, CO
Year: 1987
Model: Wagoneer
Engine: AMC 242 I6 (4.0 L)
Not filling out your info and making someone who is already donating there time need to search just to fine out what we are talking about is a bit of a peeve. Also it seems Ether links are not displayed, or there is some issue with opening them. (than the poster won't tell you his smart thing is stupid, you need to figure it out by what they don't know.)
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
Junior Member
Joined: May 2014
Posts: 53
Likes: 0
From: Fort Collins, CO
Year: 1987
Model: Wagoneer
Engine: AMC 242 I6 (4.0 L)
Thread Starter
Junior Member
Joined: May 2014
Posts: 53
Likes: 0
From: Fort Collins, CO
Year: 1987
Model: Wagoneer
Engine: AMC 242 I6 (4.0 L)
New seal is installed! Hubs,calipers and wheels bolted back on, got some RTV on the cover and it is sitting overnight before I put gear oil in and drive it tomorrow morning. It was quite a project!
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jul 20, 2016 04:38 PM
idahomike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
84
Jun 17, 2016 07:39 AM
Mike Canada McDonald
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 30, 2015 07:48 AM
Mitchfrenchxj89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 24, 2015 11:14 PM
Team SAW
Modified XJ Cherokee Tech
1
Sep 11, 2015 08:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)