Jeep Cherokee Forum
0 2022/09/29 17:57:05
0 2022/09/28 11:14:17
Here it is installed
Here it is installed
0 2022/09/28 11:14:10
I drilled through the fender and attached rivnuts
I drilled through the fender and attached rivnuts
0 2022/09/28 11:14:03
I attached it with a rivit and drilled two holes for bolts
I attached it with a rivit and drilled two holes for bolts
0 2022/09/28 11:13:56
I made this mounting bracket to attach the front. Eventually everything will get prepped and painted.
I made this mounting bracket to attach the front. Eventually everything will get prepped and painted.
0 2022/09/28 11:13:47
And the rear
And the rear
0 2022/09/28 11:13:39
This is how the front sits
This is how the front sits
0 2022/09/28 11:13:31
This one just got bent back straight
This one just got bent back straight
0 2022/09/28 11:13:24
I bent the mounting tabs to conform to the fender
I bent the mounting tabs to conform to the fender
0 2022/09/28 11:13:15
Im going to rerout it coming straight down from the front. (That other pigtail coming from the cowl area will get rerouted steaight into the main harness at the same time. I dont like the look of how Chrysler did it)
Im going to rerout it coming straight down from the front. (That other pigtail coming from the cowl area will get rerouted steaight into the main harness at the same time. I dont like the look of how Chrysler did it)
0 2022/09/27 23:21:50
This master cylinder sensor wire will need to be moved.
This master cylinder sensor wire will need to be moved.
0 2022/09/27 23:21:41
Roughly here is where I will mount it using the OEM bracket
Roughly here is where I will mount it using the OEM bracket
0 2022/09/27 23:21:30
This is what it looks like with the wires coming out the opposite side from factory.
This is what it looks like with the wires coming out the opposite side from factory.
0 2022/09/27 23:21:18
I trimmed the bottom supports. This will eventually get plastic welded into place.
I trimmed the bottom supports. This will eventually get plastic welded into place.
0 2022/09/27 23:21:07
Kinda ugly right now but it will be cleaned up.
Kinda ugly right now but it will be cleaned up.
0 2022/09/27 23:20:54
I am going to cut off this part also.
I am going to cut off this part also.
0 2022/09/27 23:20:43
This mounting tab on the bottom tray was removed.
This mounting tab on the bottom tray was removed.
0 2022/09/27 23:20:29
0 2022/09/25 17:54:55
Hd
Hd
0 2022/09/25 17:54:18
0 2022/09/25 17:53:29
0 2022/09/25 17:07:39
0 2022/09/23 01:41:24
0 2022/09/23 01:27:56
0 2022/09/23 01:27:41
Even with the second bracket reversed, you can see there is still a slight angle. I am perfectly comfortable with this. Better than factory.
Even with the second bracket reversed, you can see there is still a slight angle. I am perfectly comfortable with this. Better than factory.
0 2022/09/17 01:30:45
Installed! Super simple to install. I moved both arms to the rear to prep for the turn-buckle. I bottomed it out as short as possible and installed one side. Then I opened up threads to make the second mointing point line up. From there once it was square, I mounted the other half.
Installed! Super simple to install. I moved both arms to the rear to prep for the turn-buckle. I bottomed it out as short as possible and installed one side. Then I opened up threads to make the second mointing point line up. From there once it was square, I mounted the other half.
0 2022/09/17 01:30:39
Side view of the backwards bracket.
Side view of the backwards bracket.
0 2022/09/17 01:30:33
I put the bracket on "backwards" so that the linkages would be even for the adjustable turn-buckle.
I put the bracket on "backwards" so that the linkages would be even for the adjustable turn-buckle.
0 2022/09/17 01:30:26
This is my remedy. I simply shaved one of the two brackets down so it wont interfere with the OEM bracket.
This is my remedy. I simply shaved one of the two brackets down so it wont interfere with the OEM bracket.
0 2022/09/17 01:30:20
Yoy can see here that the linkages are not on the same plane anymore and Azzy displays their product and sandwiching outward. The turnbuckle is fully articulated but I do not like it regardless.
Yoy can see here that the linkages are not on the same plane anymore and Azzy displays their product and sandwiching outward. The turnbuckle is fully articulated but I do not like it regardless.
0 2022/09/17 01:30:14
I threw a washer in there to fill the void so it will make full contact. Not like it really mattered but I tend to go overboard when I engineer something. I also put the bolts in backwards. There was enough room but I just wanted to be safe.
I threw a washer in there to fill the void so it will make full contact. Not like it really mattered but I tend to go overboard when I engineer something. I also put the bolts in backwards. There was enough room but I just wanted to be safe.
0 2022/09/17 01:30:06
Quick and easy work with a razor knife left me with this. Why Chrysler designed it with such a deep recess is beyond me. There was super thin metal left behind in the openening.
Quick and easy work with a razor knife left me with this. Why Chrysler designed it with such a deep recess is beyond me. There was super thin metal left behind in the openening.
0 2022/09/17 01:29:59
The OEM linkage has a 25 year old rubber bushing that is not compatible with the kit, nor do I want so its got to go.
The OEM linkage has a 25 year old rubber bushing that is not compatible with the kit, nor do I want so its got to go.
0 2022/09/17 01:29:51
So it's pretty straight forward and lot of pwople have it so i won't go too far in depth on the installation, rather what i did different.
So it's pretty straight forward and lot of pwople have it so i won't go too far in depth on the installation, rather what i did different.
0 2022/09/17 01:29:44
The sensor assembly was hard to tighten down since i dont have stubby wrenches but I managed.
The sensor assembly was hard to tighten down since i dont have stubby wrenches but I managed.
0 2022/09/16 19:27:25
I had to put the torx socket in and pry against the transmissikn dipstick tube to pry it out of the way but i got her in.
I had to put the torx socket in and pry against the transmissikn dipstick tube to pry it out of the way but i got her in.
0 2022/09/16 19:27:17
For those who dont know, the AW-4 is a Toyota transmission. This plug is used for a temp sensor on thier trucks,and Chrystler never used it. The T-55 plug is located in front of the forward transmission line right behind the bellhousing on the passenger side.
For those who dont know, the AW-4 is a Toyota transmission. This plug is used for a temp sensor on thier trucks,and Chrystler never used it. The T-55 plug is located in front of the forward transmission line right behind the bellhousing on the passenger side.
0 2022/09/16 19:27:09
Here I've got the T55 torx tool, the plug assembly and the connector for it.
Here I've got the T55 torx tool, the plug assembly and the connector for it.
0 2022/09/16 13:43:57
I got the sensor threaded in with some medium strength loctite. And I pulled the OEM O-ring off of a spare transmission adapter.
I got the sensor threaded in with some medium strength loctite. And I pulled the OEM O-ring off of a spare transmission adapter.
0 2022/09/16 13:43:49