Jeep Cherokee Forum
Out of the box, this is great for the price. It does come with some hardware, but not all of it. Which isnt much of a problem, I can souce better nuts and bolts locally for fairly cheap.
Out of the box, this is great for the price. It does come with some hardware, but not all of it. Which isnt much of a problem, I can souce better nuts and bolts locally for fairly cheap.
0 2023/03/06 19:49:37
0 2023/03/06 19:34:14
Driver's side...
Driver's side...
0 2023/03/06 19:34:05
Inside and outside of the passenger side unibody rail...
Inside and outside of the passenger side unibody rail...
0 2023/03/06 19:33:57
Shot the inside and outside of the unibody front end...
Shot the inside and outside of the unibody front end...
0 2023/03/06 19:33:47
This is the primer I was talking about
This is the primer I was talking about
0 2023/03/06 19:33:37
0 2023/03/06 19:21:59
0 2023/03/06 19:21:35
0 2023/02/17 10:28:37
0 2023/02/04 16:56:12
0 2023/02/03 19:55:38
0 2023/01/30 07:43:30
0 2023/01/26 22:14:42
Side view.
Side view.
0 2023/01/26 22:14:35
Now here's something. These are both left side rear brackets, but the right one has a notch. I'm not sure the years these came out of, but at some point Chrystler made a revision. Now, wheather or not the added or removed the notch as part of that, I have no idea.
Now here's something. These are both left side rear brackets, but the right one has a notch. I'm not sure the years these came out of, but at some point Chrystler made a revision. Now, wheather or not the added or removed the notch as part of that, I have no idea.
0 2023/01/26 22:14:27
Someone before me has shaven two front brackets down. I'm going to try to use the unmolested ones. Maybe ill find myself in the same situation the last guy was in.
Someone before me has shaven two front brackets down. I'm going to try to use the unmolested ones. Maybe ill find myself in the same situation the last guy was in.
0 2023/01/26 22:14:20
I know it's an odd amount, but I do have one complete set.
I know it's an odd amount, but I do have one complete set.
0 2023/01/26 22:14:12
0 2023/01/25 16:48:57
0 2023/01/25 16:48:26
0 2023/01/25 16:47:47
0 2023/01/25 16:26:01
0 2023/01/25 14:02:30
I trimmed it down with a razor blade.
I trimmed it down with a razor blade.
0 2023/01/24 17:02:12
I filled in the negative spaces with J-B Kwik.
I filled in the negative spaces with J-B Kwik.
0 2023/01/24 17:01:55
Contored to shape with a file.
Contored to shape with a file.
0 2023/01/24 17:01:24
0 2023/01/24 17:01:11
0 2023/01/24 17:00:58
Even though theres internal gussets, I do not want the handle to break off in my hand while I am pulling the cover open
Even though theres internal gussets, I do not want the handle to break off in my hand while I am pulling the cover open
0 2023/01/24 17:00:50
Driver side end is bent. Still not sure how to tackle this.
Driver side end is bent. Still not sure how to tackle this.
0 2023/01/24 16:27:51
Outer tube was slightly bent at the handle. Internal slide tube was okay
Outer tube was slightly bent at the handle. Internal slide tube was okay
0 2023/01/24 16:27:42
I removed the handle to start the restoration
I removed the handle to start the restoration
0 2023/01/24 16:27:32
Not too bad of shape
Not too bad of shape
0 2023/01/24 16:27:10
0 2023/01/21 20:02:19
0 2023/01/21 20:02:11
0 2023/01/21 19:42:44
These are replacement front shafts, so this "should" be the stock clearance given the front suspension is almost 30 years old. Theres about and inch of compression left for suspension travel.
These are replacement front shafts, so this "should" be the stock clearance given the front suspension is almost 30 years old. Theres about and inch of compression left for suspension travel.
0 2023/01/21 19:42:34
The rear sits at about a half of an inch away from full compression. This is perfectly fine, let me explain.
The rear sits at about a half of an inch away from full compression. This is perfectly fine, let me explain.
0 2023/01/21 19:42:28
These are replacement front shafts, so this "should" be the stock clearance given the front suspension is almost 30 years old. Theres about and inch of compression left for suspension travel.
These are replacement front shafts, so this "should" be the stock clearance given the front suspension is almost 30 years old. Theres about and inch of compression left for suspension travel.
0 2023/01/21 19:42:20
0 2023/01/21 19:34:00
These things look great! Only single complaint is they dont have greasable u-joints.
These things look great! Only single complaint is they dont have greasable u-joints.
0 2023/01/21 19:33:51