Jeep Cherokee Forum
0 2023/08/06 11:33:19
It seats in perfectly
It seats in perfectly
0 2023/08/06 11:33:12
Removed the handle lip
Removed the handle lip
0 2023/08/06 11:33:05
I removed the hinge
I removed the hinge
0 2023/08/06 11:32:58
This a standard 5.56 ammo can
This a standard 5.56 ammo can
0 2023/08/06 11:32:39
Second pass
Second pass
0 2023/08/06 11:21:32
First pass
First pass
0 2023/08/06 11:21:24
Glued it in
Glued it in
0 2023/08/06 11:17:35
Got this patch panel from ebay
Got this patch panel from ebay
0 2023/08/06 11:17:29
0 2023/08/06 11:13:01
Crimped on a new end
Crimped on a new end
0 2023/08/06 11:12:55
I extended the brake switch line
I extended the brake switch line
0 2023/08/06 11:12:48
First, I removed the hand brake
First, I removed the hand brake
0 2023/08/06 11:12:40
Better than factory
Better than factory
0 2023/08/06 10:50:56
Bolted it back together
Bolted it back together
0 2023/08/06 10:50:49
Thre it back together with grease
Thre it back together with grease
0 2023/08/06 10:50:43
Throughout the year
Throughout the year
0 2023/08/06 10:50:36
Apparently
Apparently
0 2023/08/06 10:50:30
Filled in the latch also.
Filled in the latch also.
0 2023/08/06 10:50:23
I was already this far down the road, figured bight as well do it all.
I was already this far down the road, figured bight as well do it all.
0 2023/08/06 10:50:16
Heres the size difference.
Heres the size difference.
0 2023/08/06 10:46:25
And got proper length screws.
And got proper length screws.
0 2023/08/06 10:46:18
100% infill with JB Weld. I contemplated putting some on the otherside but figured this should be enough.
100% infill with JB Weld. I contemplated putting some on the otherside but figured this should be enough.
0 2023/08/06 10:46:11
Cleaned up all excess expanding foam
Cleaned up all excess expanding foam
0 2023/08/06 10:46:04
I took apart the new armrest
I took apart the new armrest
0 2023/08/06 10:45:57
0 2023/08/06 10:36:57
After replacing the first one, this second one broke too.
After replacing the first one, this second one broke too.
0 2023/08/06 10:36:49
0 2023/05/31 19:58:08
0 2023/05/31 19:57:59
0 2023/05/29 15:10:33
0 2023/05/29 15:10:24
And shes in!
And shes in!
0 2023/05/29 15:10:16
I marked the holes before painting the brackets, but drilled them while they where drying.
I marked the holes before painting the brackets, but drilled them while they where drying.
0 2023/05/29 15:10:08
First, I removed rust, cleaned, degreased, primed and painted the new sway bar.
First, I removed rust, cleaned, degreased, primed and painted the new sway bar.
0 2023/05/29 15:10:00
The front will be flush with the unibody.
The front will be flush with the unibody.
0 2023/05/14 11:49:36
The rear and side will edge up to the steering box brace.
The rear and side will edge up to the steering box brace.
0 2023/05/14 11:49:28
0 2023/05/14 11:45:42
The main problem is the lower left bracket bolt. You can see here the right side is an external flange, but the right side is an internal one. Because the left side is right under the box and right up against the frame. If i were to have designed it, I would have just extended the bracket and made it bolt up using the main bracket's unibody bolts.
The main problem is the lower left bracket bolt. You can see here the right side is an external flange, but the right side is an internal one. Because the left side is right under the box and right up against the frame. If i were to have designed it, I would have just extended the bracket and made it bolt up using the main bracket's unibody bolts.
0 2023/05/14 11:17:50
The main problem I had,
The main problem I had,
0 2023/05/14 11:14:26
0 2023/05/14 11:14:17