Classic2000

ive had a clunk when i turn the wheel to the left. usually just one clunk unless i also hit a bump at the same time then i get another loud clunk. it makes that clunk whether the vehicle is moving or if im just moving the wheel back and forth parked. it has recently started doing it when i turn to the right as well. I cant see anything that is visually wrong and im out of ideas on what the noise could be coming from. any ideas?

ohio95xj

Ball joints?

gpXJ

I started having that clunk, and mine turned out to be the track bar. I couldn't wiggle it by hand but I had the wife get in and crank the wheel back and forth while I was under the front end. There was 1/2" of up and down play on the frame side tie rod end.

ohio95xj

Track bar is a good one as well.

wcw4496

How much lift to you have? And do you have stock track bar?

cdn_xj

x2. Most likely your track bar or track bar mount. Re-torque all fasteners.

helmut

Mine clunks because of control arm bushing.

Mcroach91

Check the track bar mount where it bolts to the frame

1999 xj

Long arms? Any johnny joints?

Classic2000

thanks for the ideas. I'll check out the track bar and see what i can find out. btw, its a 2000 classic 4.5" lift on 32s.

1999 xj

Any johnny joints?

wcw4496

It took me a while to get death wobble but almost always had a rattle from my front end after I put my 3 inch lift on with a stock track bar. I eventually broke the bolt that connected my track bar to my axle and figured it was time to buy an adjustable track bar.

Classic2000

sorry no johnny joints. rolling short arms with an adjustable track bar.

burg3rlicious

U-joints are never out of the question