New XJ owner
CF Veteran
Joined: Jul 2011
Posts: 2,164
Likes: 1
From: Warren, Pa
Year: 97
Model: Cherokee
Engine: 4.0L
I finally got to look at in the light. I pushed the plastic cap a little harder on to the sensor, now my gauge is working normal. I am interested if replacing the wire harness or what should be replaced?
I have to replace my main rear seal. Is it as easy as it sounds. It sounds like it is work and messy but not really hard?
I have to replace my main rear seal. Is it as easy as it sounds. It sounds like it is work and messy but not really hard?
I am torn about tire's.
I need new ones soon my used ones are thin on the front.
I like the 30 to 31 sized tire there are about 4 sizes in 1% of each other and I am pretty sure will fit. The 235/75 are small. I only drive on the street.
It is all about money
I need new ones soon my used ones are thin on the front.
I like the 30 to 31 sized tire there are about 4 sizes in 1% of each other and I am pretty sure will fit. The 235/75 are small. I only drive on the street.
It is all about money
SO I think 31/1050 will fit under my 2" lift. if it only rubs a little for real my car is a pavement queen form my parking spot to parking spot and 31's are much eaiser to find and cheeper in may cases. can I stuff 31's under a 2" lift?
CF Veteran
Joined: Aug 2010
Posts: 1,085
Likes: 3
From: Fountain Inn, SC
Year: 1988
Model: Comanche (MJ)
Engine: I6 4.0L
i had to trim my bumper corners for 31s and a 3" lift, mines a 99



