Sep 21, 2015, 02:17 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
CF Veteran
Joined: Sep 2009
Posts: 4,145
Likes: 0
Senior Member
Joined: Mar 2010
Posts: 660
Likes: 0
From: Hampton, Virginia
Model: Cherokee
Engine: none other
i dont know why i couldnt figure that one out
.
Newbie
Joined: Mar 2010
Posts: 7
Likes: 0
From: West Reading
Year: 1990
Model: Cherokee
Engine: 4.0
I have a 1990 Jeep with a 4 inch lift. Can I put on 33 inch tires Or will I need wheel spacers or have to cut my fenders. Hopefully Not Someone give me good news
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
Alright guys I need some opinions...I'm currently planning a RC 3" Series II Lift with full springs. On top of that, I'm thinking of adding IRONMAN ANDY'S adj. shackles, and JKS ACOS coil spacers. I contacted RC via live chat and asked the guy if the Series II would accept Sway-Bar Disconnects, as I'd like a little more flex. He said "Not for the XJ". IS THIS TRUE? If so, then I am really going to reconsider my route for the lift. BTW I'm planning on running 30 or 31x10.50's After lift is installed. I need some help determining if his answer is correct, and an overall opinion of my lift set-up. Thanks!
Senior Member
Joined: Mar 2010
Posts: 550
Likes: 0
From: upstate NY
Year: 1998
Model: Cherokee
Engine: ???
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Sep 2009
Posts: 4,145
Likes: 0
CF Veteran
Joined: Jan 2010
Posts: 1,062
Likes: 0
From: Fort lewis, wa/ university place, wa
Year: 1999
Model: Cherokee
Engine: 4.0L
So Im thinking about getting a sye kit. Im only at three inches of lift, but that wont be there for long. Is it going to hurt anything to have it on there before I get up to 4.5? Also what else do I need to get along with a sye kit? How hard are they to install?
Nevermind... new CV driveshaft right?
Ok so what about a transfer case drop kit. Disadvantages? Do you have to have a crossmember or is that just a clearance thing? A drop kit would be a temp fix for the sye problem right?
Nevermind... new CV driveshaft right?
Ok so what about a transfer case drop kit. Disadvantages? Do you have to have a crossmember or is that just a clearance thing? A drop kit would be a temp fix for the sye problem right?
Last edited by cob24; Mar 18, 2010 at 08:07 PM. Reason: Found the answer myself
Newbie
Joined: Mar 2010
Posts: 10
Likes: 0
From: eugene, oregon
Year: 1992
Model: Cherokee
Engine: 4.0 H.O.
if i get a 3inch RC AAL lift and put 2inch spacers in the front and shackles in the back what else will i need to get??
Last edited by 92xjdude; Mar 18, 2010 at 10:40 PM.
