WJCraig's Sliderz install!
#1
Senior Member
Thread Starter
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
WJCraig's Sliderz install!
Well, was going to install these today, but then my drill crapped out on me...Maybe tomorrow, if the rain doesn't come....Anyway, here's some pics:
Blasting to prep these bad boys for paint:
One Blasted, One to go...
Painted and ready for install:
Getting ready to mark and drill the holes:
And that's when I found out that I had no way of drilling the holes. Oh well, at least I know they'll fit, and I've got the hole locations marked...
To be continued with a new drill.....
Later.
Blasting to prep these bad boys for paint:
One Blasted, One to go...
Painted and ready for install:
Getting ready to mark and drill the holes:
And that's when I found out that I had no way of drilling the holes. Oh well, at least I know they'll fit, and I've got the hole locations marked...
To be continued with a new drill.....
Later.
#3
Senior Member
Thread Starter
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
Well....managed to get ONE of the sliders bolted up before the rain came down in ridiculous proportions...
First things first...ther proper equipment when doing an install of any kind is a MUST:
Looking towards the front:
Looking towards the rear:
AND the monsoon that put an end to the install for today.....
So now I have One slider on, and one in the garage. Maybe one day I'll get this project (which SHOULD have been fairly quick and easy) completed...
Oh well...Maybe tomorrow....
Later
First things first...ther proper equipment when doing an install of any kind is a MUST:
Looking towards the front:
Looking towards the rear:
AND the monsoon that put an end to the install for today.....
So now I have One slider on, and one in the garage. Maybe one day I'll get this project (which SHOULD have been fairly quick and easy) completed...
Oh well...Maybe tomorrow....
Later
#6
Senior Member
Thread Starter
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
It was a little soggy out....But I managed to get tho other one fitted today. Maybe post some pics tomorrow. Then test them out on Saturday or Sunday!
Trending Topics
#8
Seasoned Member
Join Date: Feb 2008
Location: Durham, NC
Posts: 339
Likes: 0
Received 2 Likes
on
1 Post
Year: 2003
Model: Grand Cherokee
Engine: 4.0L, 63mm TB, FIPK, Gibson Exhaust
what brand are those, you make them or buy them, they look really nice and well made. Do they bolt to the pinch weld too?
#9
Senior Member
Thread Starter
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
Here's a couple pics of what the sliderz look like on my Heep...
(Yeah, I know...I need to Vacuum the beast out...)
Well, I'd like to take credit for those welds....but my skill in the gluing of metal is not anywhere near that pretty. These sliders come from Kevin's Off road, in Az. You just have to prep, paint (Or powdercoat, line-x, or whatever) and install. They're made of 1/8" steel, and I'm pretty sure can take a pretty hefty beating. They bolt to the subframe, and just behind the pinch weld. You can see the mount plate on the right upper side in this pic:
Later.
(Yeah, I know...I need to Vacuum the beast out...)
Later.
#12
Senior Member
Thread Starter
Join Date: Mar 2008
Location: British Columbia, Canada
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Grand Cherokee
Engine: 4.7L V8
Thanks fellers. I'm assuming you're refering to the install or the product, and not my carpet...
Anyway, going out to check for strength and protection properties of these units tomorrow...
Supposed to be sunny and 21ºC tomorrow... (That's 69.8ºF for Y'all Americans)
Later.
Anyway, going out to check for strength and protection properties of these units tomorrow...
Supposed to be sunny and 21ºC tomorrow... (That's 69.8ºF for Y'all Americans)
Later.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
frado2jr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-15-2015 10:20 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)