Gear Shifter Belt/Dust cover binding up
05-06-2018, 07:53 PM
#1
Newbie
Thread Starter
Join Date: May 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Gear Shifter Belt/Dust cover binding up
My 2006 Grand Cherokee's rubber gear shifter belt/dust cover is binding up when I put it in drive.....I have to force it to go in drive. Any suggestions on how to fix this? Any good videos available? Thanks
ralph
ralph
05-09-2018, 08:48 AM
#2
Junior Member
I've seen this a few times. Sometimes its something stuck under the console (marble, french fry, etc..), sometimes it's linkage issue. Have you had a look underneath?
05-09-2018, 03:42 PM
#5
Seasoned Member
Dude.... OP stated his 06 Grand... not an XJ. WAAAAYYY different... but at the same time, trim/dash removal is always basically the same. no matter make/model/year.
05-09-2018, 08:42 PM
#6
Old fart with a wrench
If he looks at wkjeeps.com like I already told him, he would find out how to remove it in the "interior trim" removal section. 
05-10-2018, 09:37 AM
#7
Junior Member
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
LadyKenai
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
02-25-2018 06:37 PM
RR 1982
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-23-2011 08:51 AM
duffman5001
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
06-09-2010 12:09 AM
1990cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-16-2010 10:28 PM
iduno_justxploded
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-11-2009 10:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)