Front axle question
#2
CF Veteran
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 14 Likes
on
14 Posts
Model: Cherokee
98 is a inline 6 not a v6,Yes the axle will bolt in but both the v8 and inline 6 used different gear ratios which will cause problems if have to different gear ratios front and rear.
#3
Old fart with a wrench
The axles are the same. The only difference might be the driveshaft, weither or not it has a CV input or not. Even that can be changed. The joints at the wheels don't matter, either CV or u-joints will work.
The ratios of the front and rear MUST be the same or you'll blow the transfer case or one of the axles.
Take the cover off your front axle. Count the ring gear teeth. 39 teeth is 3.55, 41 teeth is 3.73. (the pinion is 11)(Dana 30)
The ratios of the front and rear MUST be the same or you'll blow the transfer case or one of the axles.
Take the cover off your front axle. Count the ring gear teeth. 39 teeth is 3.55, 41 teeth is 3.73. (the pinion is 11)(Dana 30)
Last edited by dave1123; 03-31-2016 at 05:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ljobbins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
03-30-2016 10:29 PM
savagess2546
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
03-25-2016 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)