Timing Chain replaced and now no longer runs?
#1
Member
Thread Starter
Join Date: Jul 2013
Location: San Diego, CA
Posts: 141
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee (XJ)
Engine: AMC 4.0
Timing Chain replaced and now no longer runs?
The 1976 Cherokee Chief I obtained apparently had the timing chain replaced. The P.O. drove it home then the next day, it wouldn't run at all. I'm guessing the timing was messed up upon replacement. Is there anything else in the timing chain replacement process that would cause this?
And is the AMC 401 an interference engine?
And is the AMC 401 an interference engine?
#2
CF Veteran
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes
on
767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
Maybe one of the gears slipped. No way to know until you get in there.
And it could also be that nasty little guy known as Coincidence. Check the usual suspects before you tear into it. Fuel? Spark?
I once drove my car home, parked it, and could not get it to start the next day. I had spark, so I spent quite a bit of time tearing into the carburetors (yes, two) to try to figure it out, when my buddy asked, "Are you sure it has gas in it?"
Duh.
And it could also be that nasty little guy known as Coincidence. Check the usual suspects before you tear into it. Fuel? Spark?
I once drove my car home, parked it, and could not get it to start the next day. I had spark, so I spent quite a bit of time tearing into the carburetors (yes, two) to try to figure it out, when my buddy asked, "Are you sure it has gas in it?"
Duh.
Thread
Thread Starter
Forum
Replies
Last Post
TerryHoward3
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
10
01-16-2019 07:47 PM
Beefncheese
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-07-2016 09:31 AM
greg2016
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
02-28-2016 03:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)