Looks good. I like the sliders. Did you by chance sand the paint at all before spraying that bed liner? Thats the only reason I could see it coming off like that.

 

yup used 180 grit like they recommended. I then primed with self etching primer and sanded again. Follow by a good cleaner/degreaser

 

i need one of those stickers

 

Is that the paint we can see or the primer? It looks like the paint. If so, i'd say the primer was the issue.

 

yea agreed. i used dupli color bedliner but i sanded it with 80 grit and didnt use primer at all. wiped it down with wax and grease remover and that stuff is on there good. i even threw rocks and stuff at it to test it

 

i used that spray on liner on my rockers didnt even sand it just got some carb cleaner cleaned it good wiped it dried it and sprayed and its holding up good and strong didnt even chip whne i dented the rockers with my high lift

 

I think you may be right about the primer. I used a gray etching primer and then a oxide sealer primer. What you are seeing is the gray etching primer...the sealer primer is gone. I will tape it all off and sand it back down and try again I still have some left.

 

All the goodies are here!!!!!! Hopefully going for a Saturday 6-5-10 install date.

List includes:

Rear Aussie locker
4.56 Gears
Steering brace
33x9.50's
RC 6.5 LA
Chop rear quarters
Rear disc conversion
SYE
New U-joints all the way around
Synthetic Fluids



I ll have pictures up ASAP

 

Eugene the jeep ,1990 il6 4.0 for $1000 ,$1000 for all lift parts .....my name is eugene the jeep

 

You have your flag backwards

 

sorry will change them my bad

 

hows the jeep look to you guys ?

 

looks good. you should start your own build thread

 

Well at least the lift is. I will post pics as I get them uploaded to my comp.

 

First and foremost I have to insert a shameless plug to the guys at Knoxville Performance and Dyno (formerly LNS Performance) http://www.knoxdyno.com for helping me put this thing together. I could not have done it without them. Thanks guys!

Here is pictures of the finished product I will upload pics of the build when my computer stops acting retarded and allows me to access my camera.