Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

Budget Jeep build...

Old Oct 29, 2012 | 10:36 PM
  #1  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default Budget Jeep build...

building a jeep on a budget. Just got a 2001 xj, and any and all comments/suggestions are appreciated. looking to end up with an expedition style rig. getting it lifted and wrangler duratracs on it come the 6th of Nov.

will post pictures soon.

Reply
Old Oct 29, 2012 | 10:48 PM
  #2  
xjboy14's Avatar
Senior Member
 
Joined: Jun 2012
Posts: 524
Likes: 1
From: PA
Year: 1998
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
Default

Carefull with a 2001 their heads are prone to cracking. Atleast I think it was that. Could have been something else but there is something with that year.

Hope the lift goes on good and this jeep sees some love. Many pictures help.
Reply
Old Nov 1, 2012 | 03:19 PM
  #3  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default Current...

jeep as it sits stock.

Installing 3" lift on november 6th and tweaking the whole 4x4 system a little when i do. also, can i leave the back sway bar disconnected or just take it out entirely? or will that effect my ride quality?
Attached Thumbnails Budget Jeep build...-img_0369.jpg   Budget Jeep build...-img_0370.jpg   Budget Jeep build...-img_0371.jpg   Budget Jeep build...-img_0372.jpg   Budget Jeep build...-img_0373.jpg  

Reply
Old Nov 1, 2012 | 05:40 PM
  #4  
96FourOh's Avatar
Junior Member
 
Joined: Jul 2012
Posts: 62
Likes: 0
From: Norfolk,VA
Year: 1996
Model: Cherokee
Engine: 4.0L 6CYL
Default

Took my rear sway out. Barely notice a difference really. I think a lot of others feel the same. The front is the one you really need.
Reply
Old Nov 1, 2012 | 05:55 PM
  #5  
xjboy14's Avatar
Senior Member
 
Joined: Jun 2012
Posts: 524
Likes: 1
From: PA
Year: 1998
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
Default

Originally Posted by 96FourOh
Took my rear sway out. Barely notice a difference really. I think a lot of others feel the same. The front is the one you really need.
Yea with leaf springs the rear sway bar doesnt do much but the front just get quick disconnects
Reply
Old Nov 1, 2012 | 06:02 PM
  #6  
CrawlinPepper's Avatar
Senior Member
 
Joined: Jul 2012
Posts: 722
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

You need one of these to go with your sig:

[IMG]https://www.cherokeeforum.com/Name:  079DF227-F756-44B9-BFB0-9B0B923E1A1B-3925-000004B1FB875417-1.jpg
Views: 123
Size:  21.3 KBName:  079DF227-F756-44B9-BFB0-9B0B923E1A1B-3925-000004B1FB875417-1.jpg
Views: 123
Size:  21.3 KB
Reply
Old Nov 1, 2012 | 10:55 PM
  #7  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by CrawlinPepper
You need one of these to go with your sig:

[/IMG]
I plan on it!! And thanks so my for all of the comments guys. Really appreciate it all.

Also, I'm having some issues with the 4x4. When I'm going slow in 4hi, it pulls fine, if just a little jerky when I'm at full lock. But when I speed up on the road it pops out of 4hi and into neutral.

Any thoughts?
Reply
Old Nov 6, 2012 | 05:24 PM
  #8  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default

Jeep is finally LIFTED!!! got the 3incher installed today, and will be getting the tires mounted and put on tomorrow, so pumped to take it out for the first time.

will post pictures after tires are on...

A question, if i have some vibration under the driver seat between 30-40mph, what would cause that? i know the driveshaft is at a new angle, but would that really affect the transfer case on only a 3 inch lift? could it be a bad u-joint?
Reply
Old Nov 6, 2012 | 05:37 PM
  #9  
ZombieResponseJeep's Avatar
Seasoned Member
 
Joined: Jul 2012
Posts: 492
Likes: 1
From: Ohio
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by jng
Jeep is finally LIFTED!!! got the 3incher installed today, and will be getting the tires mounted and put on tomorrow, so pumped to take it out for the first time.

will post pictures after tires are on...

A question, if i have some vibration under the driver seat between 30-40mph, what would cause that? i know the driveshaft is at a new angle, but would that really affect the transfer case on only a 3 inch lift? could it be a bad u-joint?
I had the same vibe after my 3" lift between 30-40 when I let off the gas. I think it went away. Curious to hear what causes that.
Reply
Old Nov 6, 2012 | 06:09 PM
  #10  
MtnHermit's Avatar
Seasoned Member
 
Joined: Dec 2009
Posts: 387
Likes: 2
From: Colorado
Year: 1997
Model: Cherokee
Default

Originally Posted by jng
Also, I'm having some issues with the 4x4. When I'm going slow in 4hi, it pulls fine, if just a little jerky when I'm at full lock. But when I speed up on the road it pops out of 4hi and into neutral.

Any thoughts?
Unless you have a full time 4WD transfer case, you can't/shouldn't run 4WD on pavement, only gravel/dirt/snow.
Reply
Old Nov 9, 2012 | 10:18 AM
  #11  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default

My "new" xj, finally got my lift and tires put on! And my old tj, I miss her sometimes haha.
Attached Thumbnails Budget Jeep build...-image-4122864687.jpg   Budget Jeep build...-image-1700440382.jpg   Budget Jeep build...-image-3140610254.jpg   Budget Jeep build...-image-3408618287.jpg   Budget Jeep build...-image-1074711591.jpg  

Budget Jeep build...-image-1282232956.jpg  
Reply
Old Nov 9, 2012 | 11:04 AM
  #12  
CrawlinPepper's Avatar
Senior Member
 
Joined: Jul 2012
Posts: 722
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

Looks good, now pull the flares and trim off of that thing already.
Reply
Old Nov 12, 2012 | 06:40 PM
  #13  
jng's Avatar
jng
Thread Starter
Junior Member
 
Joined: Oct 2012
Posts: 79
Likes: 0
From: Louisville, KY
Year: 2001
Model: Cherokee
Engine: 4.0L
Default

Got her a little dirty the other day!!
Attached Thumbnails Budget Jeep build...-image-1800827632.jpg   Budget Jeep build...-image-727243797.jpg   Budget Jeep build...-image-336359530.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Reddave
Jeep Builds
10
Nov 7, 2018 07:30 AM
xjmachine
Fabrication & builders section.
25
Sep 27, 2015 08:22 AM
studmuffin
Cherokee Chat
16
Sep 16, 2015 07:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:34 AM.