Budget Jeep build...
building a jeep on a budget. Just got a 2001 xj, and any and all comments/suggestions are appreciated. looking to end up with an expedition style rig. getting it lifted and wrangler duratracs on it come the 6th of Nov.
will post pictures soon. :tank: |
Carefull with a 2001 their heads are prone to cracking. Atleast I think it was that. Could have been something else but there is something with that year.
Hope the lift goes on good and this jeep sees some love. Many pictures help. |
Current...
5 Attachment(s)
jeep as it sits stock.
Installing 3" lift on november 6th and tweaking the whole 4x4 system a little when i do. also, can i leave the back sway bar disconnected or just take it out entirely? or will that effect my ride quality? |
Took my rear sway out. Barely notice a difference really. I think a lot of others feel the same. The front is the one you really need.
|
Originally Posted by 96FourOh
(Post 2108233)
Took my rear sway out. Barely notice a difference really. I think a lot of others feel the same. The front is the one you really need.
|
1 Attachment(s)
You need one of these to go with your sig:
[IMG]https://www.cherokeeforum.com/Attachment 356885Attachment 356885 |
Originally Posted by CrawlinPepper
You need one of these to go with your sig:
[/IMG] Also, I'm having some issues with the 4x4. When I'm going slow in 4hi, it pulls fine, if just a little jerky when I'm at full lock. But when I speed up on the road it pops out of 4hi and into neutral. Any thoughts? |
Jeep is finally LIFTED!!! got the 3incher installed today, and will be getting the tires mounted and put on tomorrow, so pumped to take it out for the first time.
will post pictures after tires are on... A question, if i have some vibration under the driver seat between 30-40mph, what would cause that? i know the driveshaft is at a new angle, but would that really affect the transfer case on only a 3 inch lift? could it be a bad u-joint? |
Originally Posted by jng
(Post 2116528)
Jeep is finally LIFTED!!! got the 3incher installed today, and will be getting the tires mounted and put on tomorrow, so pumped to take it out for the first time.
will post pictures after tires are on... A question, if i have some vibration under the driver seat between 30-40mph, what would cause that? i know the driveshaft is at a new angle, but would that really affect the transfer case on only a 3 inch lift? could it be a bad u-joint? |
Originally Posted by jng
(Post 2108905)
Also, I'm having some issues with the 4x4. When I'm going slow in 4hi, it pulls fine, if just a little jerky when I'm at full lock. But when I speed up on the road it pops out of 4hi and into neutral.
Any thoughts? |
6 Attachment(s)
My "new" xj, finally got my lift and tires put on! And my old tj, I miss her sometimes haha.
|
Looks good, now pull the flares and trim off of that thing already.
|
3 Attachment(s)
Got her a little dirty the other day!!:)
|
All times are GMT -5. The time now is 09:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands