Northern Utah BS thread #2
CF Veteran
Joined: Sep 2011
Posts: 1,354
Likes: 0
From: vernal, utah
Year: 1995
Model: Cherokee
Engine: 4.0
Thread Starter
CF Veteran
Joined: Nov 2011
Posts: 1,179
Likes: 0
From: Lehi, Utah
Year: 90' 93'
Model: Cherokee
Engine: 4.0
Not for me, for my 5 yr old and 13mo old. So ha. Lol. I primered the rear area after some grinding and sanding. Will finish that later.
Also caught my truck on fire today. I left a rag under the carb since it was there for the last 3 yrs it got really dry and brittle. So I started my truck today. I guess the rag couldn't take the heat. Fire on. I'm freaking out, and all I could do was grab the hose and douche it down. Fried 2 msd plug wires, and the wire for my electric choke. Grrrr.
Also caught my truck on fire today. I left a rag under the carb since it was there for the last 3 yrs it got really dry and brittle. So I started my truck today. I guess the rag couldn't take the heat. Fire on. I'm freaking out, and all I could do was grab the hose and douche it down. Fried 2 msd plug wires, and the wire for my electric choke. Grrrr.
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
Originally Posted by up_yours_7
Easiest way to get the input shaft to go into the motor??? From trans
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
Originally Posted by Mr Talon
Not for me, for my 5 yr old and 13mo old. So ha. Lol. I primered the rear area after some grinding and sanding. Will finish that later.
Also caught my truck on fire today. I left a rag under the carb since it was there for the last 3 yrs it got really dry and brittle. So I started my truck today. I guess the rag couldn't take the heat. Fire on. I'm freaking out, and all I could do was grab the hose and douche it down. Fried 2 msd plug wires, and the wire for my electric choke. Grrrr.
Also caught my truck on fire today. I left a rag under the carb since it was there for the last 3 yrs it got really dry and brittle. So I started my truck today. I guess the rag couldn't take the heat. Fire on. I'm freaking out, and all I could do was grab the hose and douche it down. Fried 2 msd plug wires, and the wire for my electric choke. Grrrr.
Thread Starter
CF Veteran
Joined: Nov 2011
Posts: 1,179
Likes: 0
From: Lehi, Utah
Year: 90' 93'
Model: Cherokee
Engine: 4.0
Thread Starter
CF Veteran
Joined: Nov 2011
Posts: 1,179
Likes: 0
From: Lehi, Utah
Year: 90' 93'
Model: Cherokee
Engine: 4.0
Anyone have a extra set of rear bumper brackets? I threw mine away that were attached to the stock black bumper. I thought my spare stock chrome bumper that I want to put on had them. I was wrong.
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
Originally Posted by up_yours_7
Got the trans back in and running but now when I push the gas peddle it bogs out a dies but idles just fine. Any clue why?
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
moab rim can suck it, i'm never going down that again. i'm at about 6 in the front and 6.5 in the back with about the same bs as tristen and i inched my way down that stupid trail, i slowed everyone down lol... basically no power steering and no hydro didn't help any either though lol
By the way, mine is in the 6" range and I love it. Of course I have never measured...maybe it is so heavy it is more like 5.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Its still ran like a champ lol, Just want it done(been sitting assembled for a few months now)
I have been putting it off till after FF as I want to break it in nice and easy. should be running soon, just giving it an hour or two after work, no big rush. then break it in and do my cage... get it all in for Winter on the rocks! 

