LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Great. I hope its not push rods or cam wear. Then it is time for a rebuild! I've been running synthetic oil and either Puralator or WIX filters since I bought it. Did a few oil changes the first month and every 3k since then. Recently started making noise so maybe its telling me something.
Why is the junkyard so expensive for a pulled engine! I can get a remanned long block for the same price.
Why is the junkyard so expensive for a pulled engine! I can get a remanned long block for the same price.
I just saw 4.0 from a 1993 grand cherokee w/155,000 at the lamb pic a part today.
But that kinda defeats the purpose of replacing it right?
I say buy a block, build it right yourself, and install it yourself.
Seasoned Member
Joined: Jun 2012
Posts: 448
Likes: 0
From: las vegas, nv
Year: 1998
Model: Cherokee
Engine: 4.0
Haven't done anything else besides check the fuses and replace the headlight switch. I ran a test light across each fuse to make sure they are getting power to each side of the fuse.
Senior Member
Joined: Jan 2013
Posts: 574
Likes: 0
From: Las Vegas, NV
Year: 1999
Model: Cherokee
Engine: 4.0
So Tie Rod Saturday? We gotta meet up a little earlier than normal to make sure i can get home in time, i gotta be home by 5pm. Were should we meet and what time?
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
But if you dont buy one from the junk yard, you usually have to give up your old block as a core. Kinda sucks, you dont get to keep it for a backup engine/stroker build/coffee table base.
I just saw 4.0 from a 1993 grand cherokee w/155,000 at the lamb pic a part today.
But that kinda defeats the purpose of replacing it right?
I say buy a block, build it right yourself, and install it yourself.
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
Ok let's see if I can get all this in haha.
Smoking from the trailer harness just replace the harness like I said when we were at Hector's. those things are cheap an die all the time. They will short out and kill the light system. Btw they are supposed to all be hooked up to one light. It's fine.
Valve train ticking. It's probably a lifter. If so nothing you can so about it but pull the head and replace them all or just ignore it like I and 99% of jeep owners do.
Next a new d44 are you crazy? Jeep put crap alloy d44s in those jeeps. Either build a real 44 or a 8.8 both will be the same amount of work. I hope you and your wife feel better man
Smoking from the trailer harness just replace the harness like I said when we were at Hector's. those things are cheap an die all the time. They will short out and kill the light system. Btw they are supposed to all be hooked up to one light. It's fine.
Valve train ticking. It's probably a lifter. If so nothing you can so about it but pull the head and replace them all or just ignore it like I and 99% of jeep owners do.
Next a new d44 are you crazy? Jeep put crap alloy d44s in those jeeps. Either build a real 44 or a 8.8 both will be the same amount of work. I hope you and your wife feel better man
Last edited by The_ocho; Mar 13, 2013 at 06:59 AM.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
I'm leaving it until it starts knocking and banging lol. But I will be hunting for a block to rebuild shortly... After the lockers and gears are installed.
CF Veteran
Joined: Jun 2009
Posts: 1,415
Likes: 1
From: Las Vegas, NV
Year: 1999
Model: Cherokee
Engine: 4.0L
So. I go out to Sloan every once in a while to go shooting. If anyone is interested, tie rid dumps us right into Sloan. If anyone is interested in shooting right after the trail, we could easily make it a double plan.
