Best place to mount a cb whip? on a 96 preferably without drillin?

 

On the hood, there's by the rear light. They sell mounts, someone on here I think sells mounts

 

Ive looked all over for mounts on the taillight but couldnt find any do you know were they sell hood mounts?

 

What size bolts (and thread) do I need in order to attach an engine stand bracket to the 4.0 block

Also, the flexplate is still on, I am assuming I need to take that off to be able to attach the engine stand bracket. To do this, do I just use a breaker bar on the front crank pulley and take off the 5 center bolts on the flexplate?

 

You can make a tail light mount very easily with a piece of angle iron. Just drill a hole for the antenna and a hole for the bolt. Paint and done.

 

Is that what you did? id prefer not to drill though.

 

There's QUADRATEC, there's http://www.walcottcb.com/firestik-mk...l?cPath=28_353. Theyre around

 

You don't drill in the jeep. You drill through the angle iron. And yes thats what i did. Took all of 5 mins and it was free.

 

i know what trans fluid I need, but how much for a change?

 

Drain and fill? 4-5 quarts.

 

thanks.

 

No problem!

 

Oh that would make sense. Maybe I'll get some tweeters and find out. Thanks guys!

 

If you find an extra set sell em to me! Still haven't found any at the jy.

 

got a picture?