Cracked header?

 

i think it's more they can't HEAR the change

 

How is this one..
http://www.partstrain.com/store/deta...ont&vdesc=true

different from this one?
http://www.4wd.com/Jeep-Drivetrain-J...=CRO53007449AC

 

different manufacturer. All you need to know is Timken >>> All others

 

I just can't seem to get my head around why the crown hub is more then twice the price of the Timken... Thank you very much, that IS all I needed to know haha

 

dunno - maybe it's priced wrong?

 

are 3.55 rear gearing good or bad?

 

Depends if your stock or not lol

Stock, sure is!

Bigger tires, not so much...

 

3.55 gearing is great for a 5-speed on 31s or 32s and isn't stock

 

so its bad then? cause im stock 4 speed with 235's

 

No your fine, no need to worry about gears in your situation... He meant that those gears work well with a 5 speed tranny and slightly bigger tires than stock... Your good

 

Automatic? 3.55:1 is the factory setting for most autos. Cherokee didn't come with a 4-speed manual I don't think.

You can get away with about 30" tires before you notice too much of a change, once you go to 31" you'll notice less power in stop-and-go driving and poor acceleration. 33" will start to look pretty bad and where most people consider regearing.

 

ok cause i done the build sheet thingy and i got 3.55 gears. they seem to be good in mud tho

 

Think he meant 4 speed as in the aw4.

 

yes automatic. i really dont plan on runing 31's and what not. just woundering. i dont know hardly anything bout gearing is there a thread that can teach ya on how that stuff works. like smaller gearing used for what and bigger gearing used for what? like to learn