$10-$20 each

 

On the right side of this Page, it says it comes with a free heavy duty wire harness, but is this wire harness the one I need to run h4 bulbs? Because this is a pretty good deal on the bulbs and harness together

 

Can a jeep sit on its tires with no control arms? I'm getting ready to go take some off of a jeep tomorrow and I need to know if it will need to sit permanently on jack stands after the arms are off.

 

Not safe. Axle will roll.

 

X2

Chock the wheels and let that baby sit on jacktands till the new arms are in

 

Would a d30 from an 88 Cherokee with 4.11 gears be swappable to a 98 Cherokee for the front axle? , I have a Chrysler 8.25 in the rear, 29 spline, 3.55 gear ratios. Would I need to regear the rear to 4.10? I have 31's and I know it isn't necessary, but I might be able to get a good deal on this axle.

 

you're suposed to have the same ratio front/back!

but the d30 will fit for sure

 

Okay, is a d30 with 4.11 gears worth much?

 

Can anyone tell me if a 97 5.2 awd trans work in a 98 5.2 awd GC? Thanks

 

Can I remove a sye from another Cherokee with the same transfer case and put it on mine? If it's from a 231, does it need a new driveshaft also?

 

Welcome to CF. While that trans will bolt up, the '98 Grand Cherokee's controls, and computers are different from all other years. So it won't function properly.
The '98 Grand Cherokee transmissions are a one year only deal. I've answered this before. I have a friend that has worked at a auto salvage yard for over 25-30 years, and he looked it up in the interchange book for me.

 

I know this isn't the place to ask this question, but I dont want to start a useless thread. I recently installed new leaf springs, bushings, ect. But in ordering my parts i made a mistake that has left me with a few extra bolts. The spring bushing bolts aren't cheap but i am looking to help someone out. I just need to know how to sell them via the internet. TIA

 

EBay.com or the for sale section of this web site.

 

The point of an sye s to be able to use a longer drive shaft. So yes you will need a new drive shaft. Why don't you just swap in the xfer case with the sye already installed?

 

I mean how to actually conduct the transfer of funds.